Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

Consortium of companies operating in the development of foreign markets. It acts as sales department for the export of a number of small medium-sized industries located in the Veneto region, all operating in the sub-supply in the mechanical industry. Our partners can offer, among others, the following main operations: • Turning • Milling • Grinding • Gear Making • Cutting and bending of sheet metal • Sheet Metal Forming • Assembly • Complete Subassemblies Operative Office in Corso Fogazzaro - Vicenza IT

About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire

We offer: Range punching technique, stamping - Stamping parts (also with thread) - Bending parts (Stampings) - Drawn parts - Contact members on the strip - Complex leadframe Toolmaking - In-house tool - Modular design of complex progressive dies up to a size of 1,800 x 650 x 550 mm. Area of design - 3D design of progressive dies and fixtures

VS steel GmbH has been active in the domestic market since 2012. Our core competencies are in the field of metalworking and toolmaking. Since the founding of the company we are constantly developing and expanding. We are constantly working on improving our production processes, increasing the production area and investing in state-of-the-art production technologies. With us you get from prototypes to small series up to long-term serial deliveries. The company caters to all its customers, whether they are individuals, craft businesses or well-known clients in the automotive sector. Your satisfaction is our goal. Reliability, precision and high quality are our top priority. We have many years of experience in the automotive industry, which enables us to put our customers' orders into practice using state-of-the-art technologies. Thanks to our many years of experience, we are able to develop unique solutions for the customer according to their requirements. We accompany you from the primary idea to the final product. For reference, we refer to Skoda Auto AG. We are one of two companies that provides tooling services for the production of stamping tools for new models for Skoda Auto AG.

World market presence Bohnacker Systeme GmbH business activities around the world are coordinated from the company's headquarters in Rottenacker, Germany. Our products go out from our headquarters to over 60 countries in every continent. International sales offices in China, Russia, Belarus, Ukraine, Kazakhstan, Poland, Austria, the Czech Republic, Slovakia, Slovenia and Croatia serve countless DIY superstores and international hardware corporations, making maximum use of the opportunities for profitable business in these important economic growth regions. The company has concentrated its research and development activities in Germany. Production takes place in Germany, Hungary and China. Every year, the company transforms steel amounting to twice the weight of the Eiffel Tower into brackets, shelves, furniture legs and shelving. The company's global sourcing activities are also concentrated in Germany, Hungary and China. A large number of patents to protect its intellectual property and its heavy investment in innovation testify to the Bohnacker Systeme GmbH outstanding innovative drive.

Miglio has been operating since 1971 in the progressive die construction, stamping and sheet metal processing sector, providing turnkey solutions for customised products. What we offer - Co-design of Products with the customer - Prime project management of assembled parts - Collaboration on process development - Production of small and large batches of stamped and assembled products - Complete control of the entire production process: > Die design: 3D software, Cad-Cam, prototyping; > Die construction; > Die maintenance: dedicated internal tooling. Miglio is focused on the customer, people and the environment. Our customer approach is based on relationships and the continuous exchange of information, which allows us to offer a precise and “tailor-made” service based on specific needs. Therefore, solid and trusting relationships are established with the customer, which make Miglio not just a simple supplier, rather a strategic partner. Another of Miglio’s founding principles is attention to the environment in all phases of work, from the pursuit of the most innovative solutions for machinery dedicated to production to company and plant management. Our strength, in addition to the high technical skills of our personnel and our instrumental equipment, is largely thanks to the people who collaborate in the company and in whom we continuously invest in order to organise a satisfying and engaging work environment. A note of interest: the staff turnover within the company is very low, if not almost non-existent.

Tools of GDH Need smart tool solutions or the realization of complicated processing problems? From planning and design through the development of the individual components to the construction of the finished tool: GDH is in the design and manufacture of tools for sheet metal processing since 1992 competent partner. Our strengths are our deep-drawing tools especially when multiple trains are required. Tools we manufacture as an insert, consequential, Progressive and transfer dies, both for prototypes, as well as for series production up to a maximum weight of 10 tons. Deep-drawn parts of GDH We manufacture drawn parts made of all metal forming materials to be processed. Materials such as steel, stainless steel and nonferrous metals are brought with us into the right shape. The processing at a material thickness of 0.3 mm - 10 mm thickness up to a pressure of 800 tons possible. We manufacture according to your drawings, CAD data, and according to your samples.Their tools are taken or produced in-house. In addition, we offer the possibility of deep drawing simulation with single trains in our house. Pressed parts of GDH With us you get spun parts from all metal forming materials to be processed. Materials such as copper, brass, steel, aluminum, stainless steel, tin, and zinc are staying with us in the right shape. Rotationally symmetrical workpieces are to oä to a round plate size of 800 mm in diameter with an initial sheet thickness of 6 mm in St, 4 mm in VA, 8 mm in CU / CnZu. and 10 mm in Al manufactured as pressed parts. We manufacture according to your drawings, CAD data, and according to your samples. Their tools are taken or produced in-house. Laser Technology at GDH Lasers: We laser in 2D technology in possible sizes 3000 x 1500 mm. maximum thickness * In VA to 12 mm * St to 20 mm * Al to 6 mm In 3D technology routes of sizes 3200 x 1525 x 600 mm are possible. Maximum thickness here * In VA to 4 mm * St to 8 mm * Al to 3 mm Punch Technology GDH Punching: Up to a print capacity of 120 tons from the tape. Up to 800 tonnes in the insertion process.

Features Quality Management zertfiziert according to ISO / TS 16949:2002 including ISO 9001:2000 Measurement: Zeiss CNC 3D coordinate measuring machine, Mitutoyo 2D metrology Production range: Stamped, pressed and drawn parts, assembly, welding joints, joints Materials: Varieties: steel, stainless steel, aluminum, brass Dimensions: Coil: Bandwidth up to 800mm - strap thickness up to 6mm - Weight 5.000kg to Customers: Automotive, electrical, construction, camping and leisure industry, child safety Machine types: Stamping presses, eccentric presses, hydraulic presses, Orbital, MAG-welding robots, press welding machines, stud welding machines Dimensions: Punching machines: 40 - 400 tonnes Eccentric: 10 - 160t Hydraulic Presses: 40 - 160to Own tool: Wire EDM, sinker EDM, CNC milling, drilling, grinding Development and design: CAD - CAM System VISI-CAD Interfaces: DXF, IGES, VDA, CATIA V4, Parasolid Data exchange: E-mail, Odette

PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.

Production of milled, turned products

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

Our company, whose 1,200m2 is closed, serving in a total area of ​​1,500m2, continues to metal processing and shaping works with the knowledge and experience of its founders, today has undertaken to fulfill the requirements of the ISO 9001: 2015 quality management system standard and to continuously improve its effectiveness.

Planning, construction, manufacturing, repair and service We provide you with solutions for material testing, toolmaking and special machine construction. We can draw on a wide range of products that have already been designed and tried and tested in practice or implement individual developments for you. We are driven by finding suitable answers, precision in manufacturing and assembly, and a high level of customer satisfaction.

HELLO WE ARE A COMPANY THAT HAS SET OUT TO SERVE OUR CUSTOMERS AROUND THE WORLD WITH OUR 15 YEARS OF EXPERIENCE IN OUR BUSINESS LIFE AND TRIES TO COMBINE THIS SERVICE WITH THE HIGHEST LEVEL OF QUALITY, TIMELY DELIVERY AND REASONABLE PRICE POLICY. OUR GOAL IS ALWAYS TO REACH BETTER QUALITY

You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding

As a system supplier for electromechanical assemblies, we manufacture plastic and metal components using hybrid technology. This means that we concentrate on the production technologies of plastic injection moulding and punching and bending of metal components. The advantage for you is that you can obtain ready-assembled assemblies of the most diverse production processes from one source. By moving Friedrich Joerg GmbH in 2016 to newly built production and office premises, we were able to create a capacitive buffer. Thanks to a high degree of automation, we can offer you particularly competitive prices. We manufacture manually in small series up to large series fully automated and pre-assemble all components for you. In short, we adapt flexibly to your requirements. We provide support as early as the product development stage in order to take into account quality, cost and tool-specific aspects in the early phase. We manufacture the necessary tools or devices in our own tool shop. This also allows us to increase our flexibility, for example in case of short-term changes. Furthermore, we also offer finishing processes such as: printing on plastic parts (cliché/pad printing), hot foil stamping for a particularly noble appearance of the products, machining and ultrasonic welding. It goes without saying that we are certified according to ISO 9001:2015 and deliver a very high and consistent quality. We would be pleased if you contact us. categories: Electromechanical assemblies; Foil hot stamping; Customised plastic mouldings; Plastic optical fibres; Optical fibre components; Optical fibre systems; Optical fibre technology; Optical fibre transmission systems; Pre-assembly Assembly of small parts for industry; Assembly of plastic components; Assembly of mechanical components; Stamp-bending parts made of stainless steel, non-ferrous metal, steel; Stamp-bending tools; Connectors; Connectors for surface mounting; Complete plug connections; Pad printing; Thermoplastic precision mouldings; Thermoplastic overmoulding with plastic; ultrasonic welding of plastics; overmoulding tools for insert parts; 3-D MID components; connecting terminals for power cables low voltage & high voltage; component assembly; die casting; mould making; housings for the electrical industry; terminals for electrical cables; plastic injection moulded parts; plastic injection moulded parts with metal insert; electrotechnical plastic parts; technical plastic parts; plastic processing; multi-component injection-moulded parts; plastic-injected metal parts; product development; prototype construction; terminal blocks; technical injection-moulded parts; thermoplastic elastomer (TPE) moulded parts; jig and fixture construction; toolmaking; two-component injection-moulded parts; Imprint: https://www.friedrich-joerg.com/kontakt/impressum/ Privacy policy: https://www.friedrich-joerg.com/kontakt/datenschutzerklaerung/

SYS Pres company is metal fabrication company which spealizes in laser cutting, laser welding, welding, bending, and surface treatment operations. Surface treatments are automatic sand blasting, zinc plate, copper plate and etc. SYS Pres company's facility is 3000 sq. Our export countries are Austria, Germany, England, Netherlands, Belgium, Israel.

Your specialist for milling, turning, grinding, wire and die sinking in a wide variety of areas such as medical technology, mechanical engineering, the automotive industry, etc. We are also your contact for design and prototype production with the CAD program Solid Works.

Wirths & Werres GmbH is your partner for: Special machine construction, spindle lift gears, tool making, machine knives and series production

GEK GmbH & Co. KG is a company that specializes in the construction of tools and in the area of plastic injection molding. With many years of experience and expertise, we offer tailor-made solutions for our customers, ensuring high quality and precision in the production of tools and plastic parts. We have an extensive range of machines in toolmaking and injection molding. - 2D/3D construction - Filling simulations/ delay calculations - Measurements on our 3 coordinate measuring machines - Processing of all thermoplastics (except PVC) and a wide range of elastomers - 1K injection molding machines (cavities up to 64-fold, shelf tool, family tool) - 2K injection molding machines (servo-driven index plates, turntables, folding) - physical thermoplastic foaming (MuCell®) - Overmolding of inserts - Assembly of components (gluing, printing, coating, laser marking, etc.) are also part of our extensive portfolio. For more information, please visit our website at https://www.gek-oelsnitz.de/ and see our attached company presentation and service overview.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Our company since its founding in 1780 to the processing of metal and has successfully specialized in the course of the last century, among other things stamping and wire bending technology. Technical possibilities Stamping:  punching machines from 40 to 400 tons of pressure  all material qualities: bright, galvanized, aluminum, brass and stainless steel, from 0.5 mm to 5 mm  plate widths from 20 mm to 450 mm  component connections in the tool (metal and plastic)  sequence editing and Follow-on composite tools  finished catching products  surface treatment Wire bending technology:  different wire bending machines  wire thicknesses of 2 mm to 10 mm  processing of bare, galvanized, stainless steel and aluminum wires  finishing operations: * Welding, chamfering, recesses, threads * Cutting, drilling, crushing, etc.  component connections (metal and plastic)  surface treatment FOX is already active internationally and seeks to improve its national and international presence and continues to edit about potential promising Neumärkte / Neubranchen intense.

Punching and metal forming since 1939 The company was founded in 1939 Hohage in Halver and is still family owned. Since 1998, we develop and manufacture 2,200 m² at our location in Kierspe. With about 20 employees will be produced there in close cooperation with our customers in industry and commercial products of stamping and forming and building hardware and hinges. Lean structures and short information paths lead to customer-oriented thinking and acting. Parts are timely developed and manufactured inexpensively and with high quality standards. Our own design and own tool help to create a quick and smooth transaction. Scharniertiel, hinge elements, Stampings, holder, assemblies, ... Talk to us, we are here for you. Zeichnungsztiele, Stampings, Parzielles fine cutting, tapping, stainless steel parts, Prouktentwicklung, house design, house tool, DIN ISO 9001:2008 In the past we have made: Hinges, narrow, semi-wide, Käntig, Tischbänger, chest straps, Embossed hinges, Profielscharniere, Kreuzgehänge, Werfgehänge, shutter hinges, hooks, brackets, Winkelberbinder, chair angle, wide angle, angle of rotation, furniture elbow, tee-angle, connecting plates, wood connectors, joist hangers, flat connector, elbow connector, box fittings, box handles, container fasteners, box - protective corners,
> Go to profile