Mario Fernando Group s.r.l. is an Italian company specialized in the cold deformation of metal sheet, in particular of stainless steel and aluminium. with over 55 years of experience in the planning and construction of high quality dies our aim is to become a model for the processing of metal sheet. We can realize dies for drawing, deep drawing, bending, trimming and blanking, according to the customer's drawing. Mario Fernando Group s.r.l. offers the mass production of metal stamped parts: the dies are realized according to our customers drawings and the production managed to meet the customer’s requirements. Our company proposes innovative solutions to the most complex technical problems becoming partner of our customer for the whole process of transforming an idea into a mass production work, even with the design of special machines according to our customers’ production needs, to give support that goes beyond the tool realization. This is what we mean with partnership. Our company is ISO 9001:2015 and and IATF 16949:2016 certified.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1967
    Certifications
    ISO 9001:2015
    WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2015
    About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1934
    Certifications
    ISO 9001:2008
    Inter Technic sro has developed in more than 5 years into a powerful company. If you are interested, we work for you as an extended workbench or can help reduce overcapacity, then ask us. In January 2015, our machinery was another new and powerful 5-axis simultaneous milling extended Hermle C42. We have currently in another, new DMG CNC milling machine invested. - Table load up to 2,000 kg - Table size 1700 x 750 mm - Travel X = 1450 mm, Y = 700 mm, Z = 550 mm This machine is our production in addition to available from the KW22 / 15th A robot welding system was installed. This brings us to weld able TIG and MAG. We are very well set up for you to produce tools and jigs. We are happy to customize items, zero series, production parts or assemble complete modules. With two new wire EDM machines we can in 2-shift operation for you. Our machinery has been almost entirely reinvested. For quality assurance, is from March 2016 new Zeiss measuring machine available! For programming we use two CAD CAM - Siemens NX Unigraphics, Version: 8.5 programming stations and enables us to offer services to the 3-D machining. Another added advantage of unsrem companies: All contacts at Inter Technic spoke German except Slovak, English.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2010
    Certifications
    ISO 9001:2015
    Please allow me to introduce our company. We are a Slovak company whose major production program is orientated to manufacturing of special and precise parts for machines, different kind of fixtures, stamping tools, dies/progressive tools and transfer tools. We are a member of Rejlek Plastics Group in Vienna, Austria. We offer you capacities and experience in design and production. Our production is for the customers who are different tools and machine producers, special machine builders working in the automotive industry, electrotechnical and furniture industry and in automatization of industrial manufacturing. If you are interested in cooperation with our company, do not hesitate to call us. Yours sincerelly Viena International Slovakia
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1951
    Certifications
    ISO 9001:2015
    We offer: Range punching technique, stamping - Stamping parts (also with thread) - Bending parts (Stampings) - Drawn parts - Contact members on the strip - Complex leadframe Toolmaking - In-house tool - Modular design of complex progressive dies up to a size of 1,800 x 650 x 550 mm. Area of design - 3D design of progressive dies and fixtures
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1990
    Certifications
    ISO 9001:2015
    We process metal with heart and mind The proof of market relatedness and continuity Since its founding in 1924, we maintain a thriving collaboration with numerous commercial and industrial companies. The foundation for mutual success is our long-standing experience and expertise, our unrivaled performance and our legendary reliability. Our market and services We solve the specific tasks with all our knowledge and the latest tooling technology. We support our customers with passion through all phases of a project, however complex and convincing a perfect solution, as well as cost and schedule adherence. As a supplier in the field of punching, bending, pressing, we are equipped with latest machines and measurement techniques. Our strengths lie mainly in the tool Falling production for sheet thicknesses from 0.4 to 4.0 mm. In addition to manufacturing these parts further post-processing are possible in our home; trovalizing / vibratory grinding, cleaning, powder coating, painting. Our core competencies in sheet metal processing (stamping, bending, welding, assembly, etc.) are the result of many years of experience. Specific duties of our customers require individual solutions. We support our customers knowledgeable about all phases of a project, ie from consulting to product delivery. Here convince our services both professionally and cost comparatively as well as scheduled. Contributing a modern tooling and powerful resources at critical. Our competencies Development and Planning Toolmaking Punching Assembly Welding Powder coating
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1924
    Certifications
    ISO 9001:2015
    - Manufacture of stamping parts according to sample or drawing to 1250 kN - Manufacture of stamping parts made of copper, brass, aluminum, bronze, steel, stainless steel up to 3mm thickness from tape using electronic feed, up to 6mm from sheets or strip - Manufacture of stamping parts made of non-metallic materials - Point-and inert gas welding (MAG, TIG) - Drilling - Tapping - Thread rolling, knurling + - High gloss polishing by polishing rotary table (6 stations) or manually - Supplier `s and-drag to 80 mm in length (even more grooves per part possible) - Belt loops - Mounting (single and assembly) - Cleaning of stampings using cleaning machine - Special solutions In cooperation: Laser technology (also 3D) laser, laser welding, Bending, CNC punching nibbling, turning and milling parts, surface finishing, tool - Quantities of 100 units to 5 million units
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1937
    Certifications
    ISO 9001:2008
    VS steel GmbH has been active in the domestic market since 2012. Our core competencies are in the field of metalworking and toolmaking. Since the founding of the company we are constantly developing and expanding. We are constantly working on improving our production processes, increasing the production area and investing in state-of-the-art production technologies. With us you get from prototypes to small series up to long-term serial deliveries. The company caters to all its customers, whether they are individuals, craft businesses or well-known clients in the automotive sector. Your satisfaction is our goal. Reliability, precision and high quality are our top priority. We have many years of experience in the automotive industry, which enables us to put our customers' orders into practice using state-of-the-art technologies. Thanks to our many years of experience, we are able to develop unique solutions for the customer according to their requirements. We accompany you from the primary idea to the final product. For reference, we refer to Skoda Auto AG. We are one of two companies that provides tooling services for the production of stamping tools for new models for Skoda Auto AG.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2012
    Certifications
    ISO 9001:2015
    Tools of GDH Need smart tool solutions or the realization of complicated processing problems? From planning and design through the development of the individual components to the construction of the finished tool: GDH is in the design and manufacture of tools for sheet metal processing since 1992 competent partner. Our strengths are our deep-drawing tools especially when multiple trains are required. Tools we manufacture as an insert, consequential, Progressive and transfer dies, both for prototypes, as well as for series production up to a maximum weight of 10 tons. Deep-drawn parts of GDH We manufacture drawn parts made of all metal forming materials to be processed. Materials such as steel, stainless steel and nonferrous metals are brought with us into the right shape. The processing at a material thickness of 0.3 mm - 10 mm thickness up to a pressure of 800 tons possible. We manufacture according to your drawings, CAD data, and according to your samples.Their tools are taken or produced in-house. In addition, we offer the possibility of deep drawing simulation with single trains in our house. Pressed parts of GDH With us you get spun parts from all metal forming materials to be processed. Materials such as copper, brass, steel, aluminum, stainless steel, tin, and zinc are staying with us in the right shape. Rotationally symmetrical workpieces are to oä to a round plate size of 800 mm in diameter with an initial sheet thickness of 6 mm in St, 4 mm in VA, 8 mm in CU / CnZu. and 10 mm in Al manufactured as pressed parts. We manufacture according to your drawings, CAD data, and according to your samples. Their tools are taken or produced in-house. Laser Technology at GDH Lasers: We laser in 2D technology in possible sizes 3000 x 1500 mm. maximum thickness * In VA to 12 mm * St to 20 mm * Al to 6 mm In 3D technology routes of sizes 3200 x 1525 x 600 mm are possible. Maximum thickness here * In VA to 4 mm * St to 8 mm * Al to 3 mm Punch Technology GDH Punching: Up to a print capacity of 120 tons from the tape. Up to 800 tonnes in the insertion process.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1992
    Certifications
    DIN EN ISO 3834
    Features Quality Management zertfiziert according to ISO / TS 16949:2002 including ISO 9001:2000 Measurement: Zeiss CNC 3D coordinate measuring machine, Mitutoyo 2D metrology Production range: Stamped, pressed and drawn parts, assembly, welding joints, joints Materials: Varieties: steel, stainless steel, aluminum, brass Dimensions: Coil: Bandwidth up to 800mm - strap thickness up to 6mm - Weight 5.000kg to Customers: Automotive, electrical, construction, camping and leisure industry, child safety Machine types: Stamping presses, eccentric presses, hydraulic presses, Orbital, MAG-welding robots, press welding machines, stud welding machines Dimensions: Punching machines: 40 - 400 tonnes Eccentric: 10 - 160t Hydraulic Presses: 40 - 160to Own tool: Wire EDM, sinker EDM, CNC milling, drilling, grinding Development and design: CAD - CAM System VISI-CAD Interfaces: DXF, IGES, VDA, CATIA V4, Parasolid Data exchange: E-mail, Odette
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1956
    Certifications
    IATF 16949:2016
    Production of milled, turned products
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2017
    Certifications
    ISO 9001:2015
    In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1877
    Certifications
    ISO 9001:2008
    HELLO WE ARE A COMPANY THAT HAS SET OUT TO SERVE OUR CUSTOMERS AROUND THE WORLD WITH OUR 15 YEARS OF EXPERIENCE IN OUR BUSINESS LIFE AND TRIES TO COMBINE THIS SERVICE WITH THE HIGHEST LEVEL OF QUALITY, TIMELY DELIVERY AND REASONABLE PRICE POLICY. OUR GOAL IS ALWAYS TO REACH BETTER QUALITY
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2023
    Certifications
    Planning, construction, manufacturing, repair and service We provide you with solutions for material testing, toolmaking and special machine construction. We can draw on a wide range of products that have already been designed and tried and tested in practice or implement individual developments for you. We are driven by finding suitable answers, precision in manufacturing and assembly, and a high level of customer satisfaction.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1970
    Certifications
    ISO 9001:2015
    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Techpilot Premium Member
    Glatec EOOD
    Glatec is your reliable partner for manufacturing subassemblies from metal. Glatec collaborates with companies from the electronic, machine building, home appliance and furniture industries. Glatec is one of the leading producers of fittings for beds and kitchen appliances in Europe. Our production is set up for manufacturing components and subassemblies in order quantities from 5000 to 500’000 articles. This allows us to react promptly and flexibly to your requirements. We focus on processing sheet metal, varying in thickness from 1 to 5 mm, coils up to 400 mm wide. We operate three automatic feed presses with a pressure range from 630 to 2500 kN. For separate operations, presses varying from 100 to 2500 kN in force are available. Stamping, bending and progressive dies are designed and produced in our own tool making shop. We also produce our automation solutions inhouse. For quality assurance 3D measuring equipment is available in-house. All CNC controls are linked into the company network. Programming of the machines is done with NX CAM Express.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    DIN EN ISO 3834
    Stamping and forming technology Toolmaking Assembly production
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1981
    Certifications
    IATF 16949:2016
    Your specialist for milling, turning, grinding, wire and die sinking in a wide variety of areas such as medical technology, mechanical engineering, the automotive industry, etc. We are also your contact for design and prototype production with the CAD program Solid Works.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications
    ISO 9001:2015
    Rudi Göbel GmbH & Co. KG, based in Helmbrechts, is managed by owner & managing director Frank Pichler. The company was founded in 1957 and, with its three locations and 500 employees, specializes in the production and sale of plastic, metal and silicone solutions. The extensive product range, as well as our own tool shop with over 100 specialists, includes precision components, weight-reduced high-performance components and system solutions for displays and controls. The offer is aimed primarily at power electronics, the automotive sector and industrial technology. The high-quality and innovative products from Rudi Göbel GmbH & Co. KG impress customers from all over the world. In addition, the company offers a comprehensive range of services that combines all development, toolmaking, manufacturing, finishing and assembly work. You can find out more about the services offered by Rudi Göbel GmbH & Co. KG on the company's website.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1957
    Certifications
    IATF 16949:2016
    Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1966
    Certifications
    ISO 9001:2015
    Our company since its founding in 1780 to the processing of metal and has successfully specialized in the course of the last century, among other things stamping and wire bending technology. Technical possibilities Stamping:  punching machines from 40 to 400 tons of pressure  all material qualities: bright, galvanized, aluminum, brass and stainless steel, from 0.5 mm to 5 mm  plate widths from 20 mm to 450 mm  component connections in the tool (metal and plastic)  sequence editing and Follow-on composite tools  finished catching products  surface treatment Wire bending technology:  different wire bending machines  wire thicknesses of 2 mm to 10 mm  processing of bare, galvanized, stainless steel and aluminum wires  finishing operations: * Welding, chamfering, recesses, threads * Cutting, drilling, crushing, etc.  component connections (metal and plastic)  surface treatment FOX is already active internationally and seeks to improve its national and international presence and continues to edit about potential promising Neumärkte / Neubranchen intense.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1780
    Certifications
    ISO 9001:2008
    What began in 1852 as a bolt forged in the heart of the Sauerland, today offers a range of more than 6,500 products. With our own numerous design and utility patents, as well as patterns provides GAH innovations since 1852! GAH is now a company with about 430 employees, which has five locations on three continents ist.In Germany, Europe and the world GAH has developed into the fourth generation of the successful and expanding Sytemanbieter for commerce, trade and industry. About 6,000 pan-European trading partners trust us every day.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1852
    Certifications
    DIN EN 1090
    Punching and metal forming since 1939 The company was founded in 1939 Hohage in Halver and is still family owned. Since 1998, we develop and manufacture 2,200 m² at our location in Kierspe. With about 20 employees will be produced there in close cooperation with our customers in industry and commercial products of stamping and forming and building hardware and hinges. Lean structures and short information paths lead to customer-oriented thinking and acting. Parts are timely developed and manufactured inexpensively and with high quality standards. Our own design and own tool help to create a quick and smooth transaction. Scharniertiel, hinge elements, Stampings, holder, assemblies, ... Talk to us, we are here for you. Zeichnungsztiele, Stampings, Parzielles fine cutting, tapping, stainless steel parts, Prouktentwicklung, house design, house tool, DIN ISO 9001:2008 In the past we have made: Hinges, narrow, semi-wide, Käntig, Tischbänger, chest straps, Embossed hinges, Profielscharniere, Kreuzgehänge, Werfgehänge, shutter hinges, hooks, brackets, Winkelberbinder, chair angle, wide angle, angle of rotation, furniture elbow, tee-angle, connecting plates, wood connectors, joist hangers, flat connector, elbow connector, box fittings, box handles, container fasteners, box - protective corners,
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1938
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    ENKO d.o.o
    We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    The Johann Kaifel tooling GmbH produces tools and stampings for all areas of industry and trade. Our customers include suppliers to the automotive industry, and manufacturers of lighting fixtures, electrical appliances, household appliances and cosmetics packaging. The company Johann Kaifel tooling GmbH currently employs 15 people, including 6 in parts production. Since October 2002 we produce in our newly built factory with over 1000 square meters of production area. Our strengths lie in the complete production of tools and standard parts with all related operations, such finished examine, refine and assemble. Overview of services 1 Toolmaking Manufacture of progressive dies, cutting, bending and stamping tools. It can be used the following manufacturing processes: wire EDM, sinker EDM, grinding, cylindrical grinding, CNC turning and CNC milling. 2 Stamping Production of stamped parts from all materials such as aluminum, brass, copper, stainless steel, PVC and much more, with all kinds of follow-up processing. (Thread cutting, surface finishes, spot welding up to a stamping pressure of 160 tons.)
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1975
    Certifications
    ISO 9001:2008
    C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Go to profile
    Employees
    > 1000
    Year of foundation
    1806
    Certifications
    Precision rotary parts, - milling and ground parts (Ground parts) - Transmission shafts (drive shafts) to 1500 mm, hollow shafts, rotor shafts - Flanges (Intermediate), bolts, fittings, machine components - Cells wheels, worm shafts, knife shafts. - Guide rails, shaped pillars Machine Knives Knives industrial Press Brake - Perforating, squeezing knives, shear blades, packaging knives. Knives for plastics industry, mill knives, textile knives, sheeter knives, crush cutter, foil knife, knives, tungsten carbide blades, serrated blades, welded-on blades, slitter knives, Plotter and other machinery knives. Circular knife round knife Circle diameter (round blade) are rotating tools that can be (with counter-blade) was used with a knife cut or shear cut method. Circle diameter (round blade) can be produced for different applications from different materials (stainless steel, tool steel, HSS or stainless steel).The particular design can customized (eg ground on both sides, toothed, 2-wading, etc.). There arise because different names such as, crush cutter, top cutter, bottom cutter, pen-knife, plate diameter, perforating circular knives, rotor diameter, roller blades, etc. In addition, we also manufacture the knife holder and knife shafts and induviduelle cutting devices. The regrinding of circular knives is almost always worthwhile. Punching tools Punching diameter: Punching knife and cutting die are made from solid steel (eg tool steel 1.2379). The blades are hardened and ground. Punching blade made of solid material, are especially suitable for punching work with very precise contours as well as for long-term use, as they can be reground. Made of solid steel, we can also very small and precise punching knife and punching iron manufacture (eg samples dancing). Dies: We manufacture cutting knife and cutting dies from hardened steel strip and for a variety of punching tasks.Depending on the application, band knife made of spring steel, carbon steel, tool steel, stainless steel. Compared with the cutting knives made of solid steel, they are affordable and are suitable especially for disposable knives as well as large punch surfaces. We have stamping tools for individual tasks. - Cutting die, die cutting knife, cutting knife for test specimens, punches, punching, stamping dies, Steel rule dies, punches, - Cutting rollers, cutting mills, crushing blade - Punches and dies, punches, forming punches Flat - and cylindrical grinding - Surface grinding, surface grinding up to 3000 mm length - Cylindrical grinding up to 400 mm diameter - Fine grinding, lapping, polishing - Carbide Grinding Roll manufacturing roll grinding and - Rolls, roll cores, drive rollers, winding rollers, form rollers, fluted rollers Nippers, the cutting rollers, roll forming, turning rolls <
    > Go to profile
    RUDA-Metall GmbH The company RUDA-Metall GmbH was founded in 1982 and has its manufacturing focus in the area of technical stampings. Here components for the automotive industry and its suppliers and the electrical industry are manufactured for years. The modernized about 2 years ago vibratory finishing system, we can achieve the best results even for your parts. The tools are designed and manufactured in our own modern tooling. In 1994, with the company K.Fr. Brahm, consisting since 1868, a group of companies founded. The K.Fr. Brahm manufactures focus: furniture fittings, hinges, stampings for light domes, scaffolding, electrical parts, office furniture and fittings for the mirror industry. In order to work more efficiently and more cost effective for your customers in the future, the K.Fr. was Brahm 1-1-2006 integrated GmbH in the company RUDA metal. Our Lord Dannhorn (Dip.Ing. Engineering FH and Dipl. Economics FH), as well as our technicians and master craftsmen to support you in the optimal and cheapest design your parts.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1868
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Glutz AG
    Locking and Hardware Industrial Components
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1863
    Certifications
    ISO 9001:2008
mehr anzeigen