Watch

    Techpilot Premium Member
    PMT GmbH
    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008
    Located in Reggio Emilia, we are a young and dynamic company, specialized in industrial supplies. We are committed to providing a complete package to the customer, always using cutting-edge technologies and guaranteeing certifiable quality. We produce turning and milling parts complete with all the required heat or surface treatments. We are also active in the sheet metal sector through laser cutting, bending and welding. We also work with plastic and rubber materials through molding but also mechanical processing. Through the 3D Printing department we are able to support the customer also in the prototyping phases but also in mass production. Other services that distinguish us are Laser Marking, Design, the supply of Commercial Screws and Bolts and Internal Assembly.
    > Go to profile
    Employees
    Year of foundation
    2012
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    TMV VAGO SRL
    TMV Vago is a company located close to Milano, specialized in precision mechanical machining. Born as a mechanical turning shop, over the time it has developed a set of technologies and skills that now collaborate in the mass production of mechanical components for various sectors: Turning, milling, laser cutting and welding. Machining from solid of multiple metals, some plastic materials, and sheet metal and three-dimensional laser cutting is carried out. Additionl services such ad mechanical assembly, laser marking, finishing are provided.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1991
    Certifications

    Watch

    Techpilot Premium Member
    Buechi AG
    Individuality and innovation - two tags that characterize the modern world of work. In our family the development of individual and holistic solutions for our customers for over eighty years program. With this philosophy, our company has successfully maintained on a challenging market. What has changed in that time, the technical possibilities. Thanks to modern means of production, the processing of sheet metal are virtually no limits today. A highly motivated team of around thirty-five employees would be to develop tailor-made solutions for our customers. A permanent training of employees and an innovative spirit development offer our customers the guarantee of a professional advice, reliability and quality. Outward sign of our high quality standards, the ISO 9001:2008 certification, which we have since 1996. Create and develop unusual, this is our daily challenge. Customer focus and experience are qualities which we have maintained for four generations in our company and want to keep up in the future.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1930
    Certifications
    EN 15085
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    DIN EN 1090
    Innovative plastic products since 1989 The BÖHL-plastic GmbH & Co. KG specializes in the production certified technical precision injection molded thermoplastics. We cooperate with raw material manufacturers, but also with colleges and universities. Because the plastic processing is a challenging topic. Individual solutions are our strength. Our activities span the injection molding production for the lighting and automotive supplier industry. We are also working for the industries fittings, electrical and electronics, medical, furniture, steel and textiles. The headquarters of our plastic processing company located in southern Westphalia. Here we present for you since 1989 plastic parts from all common thermoplastics ago. We are supported by our own mold.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Nosta GmbH
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1976
    Certifications
    IATF 16949:2016
    Certinvest owns a mechanical workshop for the production of complex parts such as bottles blowmolds, extrusion screws and dies, injection molds parts, etc. with over 25 years of experience. The workshop is equipped with 3/5 axis machining centres, milling/turning machines, grinding machines, measuring machines, all of them with German origin (Deckel).
    > Go to profile
    Employees
    500 - 1000
    Year of foundation
    2003
    Certifications
    ISO 9001:2008
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1947
    Certifications
    ISO 9001:2015
    Aria was founded on a simple principle of providing the customers with one-stop solution of design, development and production for both plastic and metal components and its support tooling. And we are set to compete in anything the industry has to offer in terms of quality, price and services. Aria’s high-tech manufacturing and production facilities include CNC Turning, Milling, Injection Molding, Die casting, Stamping as well as a range of finishing techniques. We welcome your queries!
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    2010
    Certifications
    IATF 16949:2016
    Injection We squirt for you all on behalf of small batches to larger blanket orders. Moldings with insert (eg metal) are possible. Upon request, we also take over the complete material management for your production order, and store the injection molding tools for you. You only call from, we do the rest for you. Mould With a choice of partner companies in Germany, Europe and Asia, we are able to create you an offer for your individual molding tool you define the number of cycles, number of cavities, as 1k / 2k tool etc. mounting service If you already have a fully developed product and are still looking for a suitable partner for the assembly of sub-groups or complex assemblies, we are pleased to offer our services. Our strength lies in a very precise mounting. Here we are particularly specialized in the soldering and bonding, accurate mounting crafted and reliable final inspection.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2013
    Certifications
    ISO 9001:2015
    SERVICES "WHO ALWAYS DOES WHAT YOU CAN ALWAYS REMAIN THAT, WHAT IT ALREADY IS. " That is why our portfolio is constantly evolving in line with our customers' wishes. Because our claim is based on your needs. You can currently choose from the following range of services. If your request is not listed, please do not hesitate to contact us. Special mechanical engineering Injection molding machine automation Manufacturing technology for Li-ion cell production Assembly systems Testing machines Manufacturing technology for the manufacture of SMD contact components Manufacturing technology for flat conductor cable manufacture and assembly Handling and transport systems Tools and fixtures
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2000
    Certifications
    ISO 9001:2015
    In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches. Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger. In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall. The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern. In 2000, the certification according to DIN EN ISO 9002 was carried out. As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the Hohenlohe precision parts GmbH. Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners. The reward for good quality and very little complaints are our satisfied customers.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1982
    Certifications
    ISO 9001:2015
    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Techpilot Premium Member
    Spring Srl
    Professional Rapid Prototyping Creation of: Prototypes aesthetic Functional prototypes Preproduction Fixtures, Factory tooling Main fields of application: Consumer Household Aeronautical Rancing Automation Gardening Production of resistant parts, accurate, functional with dimensions up to 914x610x914 mm. Nine material options, it’s suitable for building fixtures, factory tooling and end-use parts, as well as the most demanding 3D prototyping. Materials, including high-performance thermoplastics for biocompatibility, static dissipation and resistance to heat and chemicals (ABS, ABS ESD7, PC-ABS, PC, ULTEM 9085, PPSF).
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1998
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    Cellwar GmbH
    Plastic is our passion. Design our strength. In line with our guiding principle "Innovation in Plastics", we have been developing clever plastic solutions for the individual needs of our customers for decades. The high-quality plastic applications are produced exclusively by experts in our factory in Switzerland. 100% Swiss quality and genuine craftsmanship. No production line work. Reliability and timely delivery are very important to us. Cellwar is an owner-managed company. Benedikt Zenhäusern, Chairman of the Executive Board and Christian Poffet, Member of the Executive Board work day by day with more than 30 highly qualified and motivated employees on new ideas and solutions in processing technology. In order to get qualified junior staff, we directly train our own apprentices.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1906
    Certifications
    ISO 9001:2015
    Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1966
    Certifications
    ISO 9001:2015
    Production of turned and milled parts according to drawings, data sets or sketches.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2008
    Certifications

    Watch

    Techpilot Premium Member
    EWOQE
    EWOQE was founded in January 2021, starting with a single machine. By 2024, the company had developed into a team of four highly qualified employees from the region and now operates around 90 machines. We now provide our customers with a wide range of additive manufacturing techniques to meet their diverse needs. - FDM / FFF [* commercially available filaments from Spectrum and extrudr] - SLS [PA12] - SLA [all * commercially available resins from Formlabs] - MJF [PA12] We source our materials and raw materials exclusively from renowned companies to ensure continuous quality. EWOQE collaborates with various companies in the field of industrial manufacturing. Our work in the field of large format printing deserves special mention, as we have been able to support renowned players from the fields of art, culture and politics as well as public institutions from the initial idea to the completion of the project.
    > Go to profile
    Employees
    < 5
    Year of foundation
    2021
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    ENKO d.o.o
    We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    We are a supplier of mainly series and individual parts in a wide variety of areas. Luck Tech GmbH consists of an experienced and well-rehearsed team, which carries out the tasks with a high degree of motivation. We offer our customers tailor-made and efficient solutions. The core competencies of the company are primarily in the area of turning and milling in contract manufacturing, we are also happy to offer you welding work, assembly of assemblies and constructions. Unless otherwise agreed, the production is carried out 100% in-house, so we can offer our customers maximum flexibility.
    > Go to profile
    Employees
    < 5
    Year of foundation
    Certifications
    ISO 9001:2015
    As a manufacturer and system supplier, we support our customers for over 30 years competent in the following areas to: - Tool design - Tooling - 3D CAD Library - Manufacture of parts according to drawings - Subcontracting Thus we accompany the product cycle from concept to volume production. Our product range is very diverse, so we appreciate our partners from different industries as a competent full service suppliers. We are happy to give you a brief overview: - Furniture industry - plumbing - household - Food - Fasteners - Automotive - Playground equipment For our customers, we are known for our consistently high quality and our delivery performance. Production range: Our machinery has a total of 15 machines. We hereby cover clamping forces from 20 t to 400 t. Thus, we are of <1 gram to produce up to parts with a maximum shot weight of 1,000 g capable of micro parts.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1982
    Certifications
    ISO 9001:2015
    We produce precision mechanical components and assemblies in small to medium batch sizes. Next is a cleanroom class ISO 5 available. CNC turned parts CNC precision parts CNC milled parts Lohndrehereie Lohnfräsereie Precision Turned Parts Precision milled parts Electropolishing Laser marking
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2001
    Certifications
    ISO 9001:2008
    The "Hennig GmbH, steel and metal products" in Pfullendorf, Baden (20 km north of Lake Constance), is a technically modern equipped, qualified family-owned business in the industry. The company specializes in the "cutting and assembly of series, single parts and assemblies", and is a reliable partner for a number of nationally known companies and corporations. Mostly wrought and saw blank, Hennig manufactures components, which are used, among other things in the clamping means and commercial vehicles, as well as in textile machine or pump, engine and transmission technology.On a variety of visual and functional parts, this complex milling, drilling, turning and grinding processes with modern tools and machines are used. Reaches Process capability and ensures Hennig by a quality management system certified according to DIN ISO 9001:2000. Production methods: Flexibility through the manufacturing process in house as: Turning point turning, CNC turning, milling, 5-axis machining, drilling, Surface grinding, CNC grinding, cylindrical grinding, 3D Measurement Spaces, grooves evacuate, evacuate gears, bumping, marking, Sawing, cleaning, assembling, assembly of components, painting ... Product examples: • Range: VEHICLE INDUSTRY Clutch and transmission parts, magnetic body, anchor plates, Rotors, pulleys, drive shafts, deflection shafts, Hubs, wheel hubs, swing axles, engine components .. • Range: SPANNTECHNIK Base jaws, jaws block,
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1979
    Certifications
    ISO 9001:2015
    The company's main driving factor is the know-how and high competence of its staff. The state-of-the-art technology park at your disposal allows you to promote a diverse range of solutions. In this way, we want to assert ourselves not only as players in this sector, but as a partner to create the synergies that can allow us to achieve its success. Our main capabilities are Laser cutting, bending, studs and nuts Crimping and high volumes for Tapping and countersinking parts.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2022
    Certifications
    Talleres Luncor is a company specialized in the field of machining, standing out in precision and quality in the manufacturing of parts. With a specialized focus on advanced technologies such as CNC lathes, milling machines, welding and 3D printing, we specialize in the production of large series of parts, as well as meticulous attention to small series and unit parts. Our highly trained and experienced team uses state-of-the-art equipment to ensure accuracy and efficiency on every project. Whether you need components for industrial applications, prototypes or customized solutions, at Talleres Luncor we are dedicated to exceeding our customers' expectations. We pride ourselves on our ability to adapt to changing market demands and offer machining solutions that are both precise and innovative. At Talleres Luncor, we don't just manufacture parts, we create reliable solutions that drive the success of our clients in their respective industries.
    > Go to profile
    Employees
    < 5
    Year of foundation
    1946
    Certifications
    Contract processing: CNC lathe - CNC milling - laser cutting of sheets and tubes - sheet metal bending - FDM printing
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    Certifications
    Westerceller Maschinenbau GmbH - We offer you optimal solutions for demanding tasks and are characterized by great experience and tradition. Shortly after the foundation of Westerceller Maschinenbau GmbH in 1976, the construction of a turning shop started as a job shop. Well-known regional drilling companies and international companies from the oil and gas supply industry were quickly won over as customers. The slogan "turning-grooving" has become increasingly important since the mid-1980s and the number of employees has been increasing steadily since then. With an experienced and motivated team, the constantly growing demands that customers place on WMB are reliably met. With the purchase of adjoining commercial space and the construction of several new production and storage halls, the company was considerably expanded in the years 1999 to 2001. In 2011, the decision was also made to set up a professional quality management system.Quality management (QM) describes all organizational measures that serve to improve the process quality, the services and thus the product in any way. This was followed by the move of the administration to a new building, centrally located on the company premises, in 2013, as well as the expansion of the company infrastructure and quality control in the following year. With the help of these measures, the qualification as a Supplier Self Release (SSR) supplier for a well-known customer was achieved, which means that selected products can be shipped worldwide without further external controls. Through future-oriented projects like these, lead times, quality and ultimately also the cooperation with the customer are continuously improved. Westerceller Maschinenbau GmbH is constantly developing and is excited about the challenges of the future. We don't go crazy with demanding tasks, but always deliver quality of the highest precision.We manufacture individual parts or small series according to customer drawings on our conventional, cycle-controlled or CNC machines. From simple wrench flats, bores, chamfers or threads of all kinds through filigree frame parts to axisymmetric components with rotary tables mounted on machine tables - we can easily manufacture it for you. In addition to plastics and aluminum, we also process high-strength materials such as stainless steel, titanium alloys or Inconel. Our machine park also has drilling / milling machines specially designed for the drilling industry with a travel in the X axis of 8000 millimeters for machining pipes. Sawing the various materials is also part of our daily routine. We cut up to a material length of 13 meters and a maximum of 400 mm in diameter with our KASTO saws. We also offer various options for confusion-free product labeling, from the classic number of strokes to laser marking, as well as extensive quality control using modern measuring and testing methods. Tasks that our internal processing cannot perform are also no problem for us. We work with reliable partners who do additional work for us with the usual high quality standard. This includes straightening, blasting, bondering, deep drilling, honing, peeling, welding, coating, eroding and much more. Various heat treatments according to specifications with subsequent material testing by ultrasound, hardness measurement, surface crack testing and X-ray are also possible without any problems. We look forward to the upcoming tasks and challenges and look forward to hearing from you! ...
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1976
    Certifications
    ISO 9001:2015

    Watch

    Uniplast
    CNC contract manufacturing for tool, machine and plant construction. Do you build tools, machines or special machines? Do you need precision parts for your machines and systems? We take over the CNC manufacturing. Contract manufacturing for mechanical engineering, tool making or mold making. Take a look at our manufacturing examples! We manufacture highly efficiently on modern machining centers quickly with high quality and on time. Leading machine manufacturers have been relying on our production since 1989.
    > Go to profile
    Employees
    Year of foundation
    Certifications
    We are your partner and service provider for model making, model making and prototyping.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications
    ISO 9001:2008
mehr anzeigen