5494 Suppliers found
List
Raster
Map
Sorted by 
    favorite star icon
    Beutter Präzisions-Komponenten GmbH...

    Your expert for complicated components and very critical applicationsBeutter is a supplier of fine mechanical components with a high production depth in small batch series. • Beutter was founded in 1909, and is located in Baden-Württemberg, very close to the A81 motorway, 60km south of Stuttgart. • We have about 125 employees. Of our production staff, over 90 % are skilled workers. • We have the capability to perform, in-house, all machining processes (turning, milling, grinding, honing), while for special processes and surface and heat treatment processes we use competent third-party suppliers. • For us, the ideal is small- to medium-sized production runs with a lot size of between 20 and 1,000 pieces. • Beutter is particularly capable within the manufacturing of components with close production tolerances. • We process all machinable materials, and are particularly experienced in processing high-alloyed steels (stainless steel, V2A, V4A, 1.4441, 17-4PH), titanium and special materials (inconel, hasteloy, Ni-base alloy, chromium molybdenum steel, tantalum, platinum-iridium, PEEK). • Our main fields of activity are: Medical technology, aeronautics, hydraulics, military engineering, mechanical engineering and measuring equipment technology. • Our quality management system is certified according to DIN EN ISO 9001:2008, DIN EN 13485 (medical products) and DIN EN ISO 9100 (aeronautics). • We can process your data via our CAD system “SolidWorks“.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1909
    Certifications
    ISO 9001:2015
    favorite star icon
    Anant GmbH

    The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2004
    Certifications
    ISO 9001:2008
    favorite star icon
    Gröbmer GmbH

    The ... Vielfätigkeit of mechanical engineering. For 35 years, our company has been working in the engineering industry. Always the goal in mind, independent and flexible manufacture our workpieces and to expand our product range, we manufacture to the highest quality standards and precision. With a modern and versatile machinery, we offer our customers experience and commitment in the development and production of their mission. Our handicraft business with about 20 employees specializing in the manufacture of parts, components and assemblies; manufacture both single and serial production are possible. We process a wide variety of metals and plastics - from 3D - CAD - design to the finished product. We design and manufacture - take your product ready for installation in reception, thus saving costs and time. As an experienced Hertseller of turned and milled parts in machinery and mold with a variety of materials, we guarantee quality, precision and flexibility. With CNC machines from renowned manufacturers in the field of machining, we produce from prototype to series production of technically demanding parts with consistent quality in 2D and 3D. Our modern CNC lathes are equipped with automatic bar feeder, driven tools, Y-axis and sub-spindle, so they allow the individual and series production of complex parts in a single pass. New in our machine park is a 5 - axis "Millturn" machining center with which we completely finished workpieces in one set-up, which leads to a significant reduction of the idle times and the precision significantly increases. With corresponding 5 - a pallet exchange system and a total of 90 tool places, we are well prepared for series production. - CNC Milling - 3-D mold - Vermessarbeiten and quality control
    > Read more
    Employees
    20 - 50
    Year of foundation
    1978
    Certifications
    DIN EN 1090
    favorite star icon
    Trico AG

    The TRICO AG - A small business, which is characterized by quality and flexibility. For Präzisionsdrehteile of all kinds, the TRICO AG is the right partner. We process various materials of up to Ø1.0mm Ø34.0mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1984
    Certifications
    ISO 9001:2015
    TP Suche Banner
    favorite star icon
    Heinzler Maschinenbau GmbH

    Heinzler company specializes in engineering and manufacturing of steel products. We work professionally and individually according to customer specifications. Our own tool and the latest machinery in the Bavarian Bruckmuhl and the Hungarian Kazincbarcika guarantee top quality - from prototype to series production.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1978
    Certifications
    DIN EN 1090
    favorite star icon
    Günter Apelt GmbH

    We are a forward-looking medium-sized company the metalworking industry. Our absolute and uncompromising precision is very much in demand.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1965
    Certifications
    ISO 9001:2015
    favorite star icon
    LOMAN s.r.o.

    We are a modern family enterprise. We are the producer of high quality serial and piece components for engineering industry, mainly specialized in manufacturing and delivery CNC machined parts, welded parts and machined castings. We produce according to customers technical documentation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2002
    Certifications
    ISO 9001:2015
    favorite star icon
    KREA Makina AS & KREA Technology AS...

    KREA Laser cutting, Welding and sheet metal fabrication. We offer a variety of services and materials in order to precisely fabricate, assemble and package metal products and parts to your specifications Our core business is welding (MAG,TIG), laser cutting and sheet metal fabrication. We are fabricating Welding cabins, welding robot platforms, Hydraulic oil Reservoirs, Frames, Burner casings, breaker bodies, filter housings, fan bodies, Cabinets, Electrical cabinets, Welded frames, Skids Welding (MIG, TIG, Electric Arc) Laser cutting parts and services Pipe cutting, bending and forming Sheetmetal cutting,bending,folding and fabrication Welded machine parts and assemblies (Structural steel and also Stainless Steel ) and deburring Machining, Turning and Grinding Wet Painting (Epoxy, 2K primer, Zinc Primer, PUR Acrylic etc) Powder coating ElectroZinc Galvanisation, Hotdip galvanisation Automation projects and machine design and building COMPANY OVERVIEW : KREA Established in 2004. Locations : IZMIR / TURKIYE (TR-035730) 100000 sqm Turnover > 10 Million EURs Personnel > 210 Certificates : ISO EN 1090 EXC 3, ISO 9001, ISO EN 3834-2 (eq DIN 18800-7), ISO 9606, ISO 45001, ISO 14001 , AD 2000 Merkblatt, PED 97/23/EC pressurised vessels We have two IWE International Welding Engineer in the company. WPS and PQR and also NDT (UT/MT/LPT etc) Target Market : Compactors, Excavators, CNC mAchines, Marine, Offshore, Automotive factories, Cement Industry, Earth moving machinery, Structures and construction, Welding robot cells, Hydraulics Mr. Tansu OZCELEBI Tel: +90 232 877 11 99 Fax: +90 232 877 04 90 email: sales@kreamakina.com We feel the support of Turkish government. http://www.kosgeb.gov.tr/
    > Read more
    Employees
    200 - 500
    Year of foundation
    2004
    Certifications
    DIN EN ISO 3834
    favorite star icon
    Goodwill Precision Machinery (Germa...

    Goodwill Precision Machinery Co.,Ltd (GPM),is a China manufacture established in 2004, Specialized in offering precision machining service for non-standard mechanical parts, spare parts, metal fabrication, precision welding, design & assembly, fixture and jigs with supplied drawings, prototype,CNC precision machining,customed machining parts...... Manage our company with ISO9001:2008 , TS16949 ,ISO13485 .ISO14001 certificated, customized ERP & Barcode Scan System. Our advantages: Easy to communicate in English,German,Japanese One Package Services Fast lead time Stable Quality Rigorous work attitude No quantity limited
    > Read more
    Employees
    500 - 1000
    Year of foundation
    2004
    Certifications
    IATF 16949:2016
    favorite star icon
    Sprick Technologies GmbH & Co. KG

    The Sprick Technologies GmbH & CO. KG has more than 40 years of experience in the field of special and precision tools. More than 72 motivated and qualified staff are ready to implement your requirements in highest precision. A comprehensive state of the art machinery ensures efficient production and a high grade of H.-G. Sprick - products. Clients from the automotive, automotive, aerospace, computer and electronics industries are among our satisfied customers. Exceptional engineering achievements today are the obvious tomorrow. To get new ideas, you have to ask the old question, disconnect the Recon from the tradition. Continuous development of the state of knowledge and investment in the latest manufacturing technology guarantee in the fast-moving markets the high quality standard of H.-G. Sprick - products. We rely on the expertise and creativity of our employees. Our team offers: * Concepts, design and product development * Tooling for injection molding, stamping and forming technology * Experiment, prototype, model and serial production tool * Jigs and spare parts production for tools and equipment * 3-D special parts, assemblies, components and serial processing * Teachings Urlehren and special measuring equipment manufacturing * Services and contract work in the highest quality
    > Read more
    Employees
    50 - 100
    Year of foundation
    1977
    Certifications
    ISO 9001:2015
    favorite star icon
    Keuerleber GmbH

    From prototype to series! We deliver to you yesterday! As a family-run company and a specialist in CNC technology, we can draw on over 30 years of experience and are flexible at the same time. We attach great importance to quality and delivery reliability. Our services include: - prototypes from 1 piece - Series parts - wage saws - CNC milling - CNC turning - vibratory grinding - grinding (round, flat) - laser marking - contract measurement (optical, tactile) - Assembly of assemblies - Clean parts (solvent & water) - Vacuum packaging, special packaging - Storage space (Kanb shares & quantity calls) Any questions? Call us: 07231 - 41 50 30
    > Read more
    Employees
    20 - 50
    Year of foundation
    1987
    Certifications
    ISO 9001:2015
    favorite star icon
    PRO CNC GmbH & Co. KG CNC-Fertigung...

    "A systematic approach to solution" The company PRO CNC GmbH & Co. KG was founded on 01.12.1990 by Michael Pfeiff under the name Michael Pfeiff. The company's headquarters was first in Varl and was moved in 1994 after Luebbecke. On 01.09.2003, the company was acquired by the current owner Volker Meier kink and then operated under the name Pfeiff toolmaking. Since 01.09.2013 we now operate under PRO CNC GmbH & Co. KG - Production Engineering and Mechanical Engineering. Mr. Meier is one kink with the company since the very beginning. The company PRO CNC GmbH & Co. KG deals with the full range of mechanical manufacturing (turning, milling, drilling, grinding) and the assembly of components and machines. Focus here is the contract manufacturing in the milling, especially the production of small parts. Cubic parts up to an edge length of 1000x600mm currently can be handled in-house CNC PRO GmbH & Co. KG. The company PRO CNC GmbH & Co. KG is able to deliver to the customer from the initial sample to mass production all.The range of parts includes the classic item to automobiles mass part. Is manufactured to eleven computer-controlled machine tools and machining centers the latest generation with up to four axes and two spindles. Some of the machines are equipped with rotary tables change. As a manufacturer, we would like to mention, among others, Bridgeport, Brother, YCM and Swabian machine tools here. The rotation range is among other things a lathe with driven tools, Y-axis and bar feeder (Biglia B650Y-turning diameter over bed max. 400mm) are available. Programming is based on dialogue and DIN controllers and by means of a CAD-CAM work on SolidWorks basis. Currently, the company PRO CNC GmbH & Co. KG two masters, a mechanical engineer, eight skilled workers, five assistants and a force in the commercial sector employs. The customer base includes about 30 customers from all sectors of the craft and the industry (electrical, mechanical, automobiles, pharmaceuticals, chemicals) in regional areas. Its customers include names like: VW, AEG, Federal Mogul, Faurecia (automotive sector) Harting, IMA, Kolbus, Oystar (engineering sector) VTG wagon Graaff, EuroMaint Rail (rail-rail vehicles) In May 2004, the company has been certified according to DIN ISO 9001-2000 since 2010, accordingly to DIN-ISO 9001-2008.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2008
    favorite star icon
    DSH Moulds And Precision Machining ...

    DSH Precision is a professional manufacturer of precision machined parts, with tolerance close as 0.003mm, 7-15 workdays lead time, ISO9001:2015 certification. The parts customized including but not limited to mechanical parts for automation winding machines, packaging machines,automobile and marine, loudspeakers, security locks, bio-reactor and medical equipment. Capacity include 5 axis CNC milling, turned-milled combined machining, turning, grinding, EDM, wire cutting etc. the relative treatment service such as heat treatment, oxidation, sandblasting, anodizing, nitriding, electro plating etc.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2004
    Certifications
    ISO 9001:2008
    favorite star icon
    A.D.O. Zerspanungstechnik GmbH

    The family ADO was founded in 2001 and since then performs turning and milling of individual items, as well as to small and medium series by. The good cooperation with competent partners makes it possible also to offer our customers yet another addition service. These include round and flat grinding, all welding processes, laser and flame cutting and surface treatments and hardening process. In addition to a flawless, high-quality execution, our company is a fast, economical and flexible to the customer, which is enabled by our lean and efficient disposition. Due to our PPS system and the MDESystems we are able to individually adjust our production to our customers and respond to particular emergencies. Through this technique, we can guarantee our customers absolute punctuality in every situation. We guarantee the quality of our work you through competent and motivated employees.Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Machining Using the latest CNC technology, we are capable of meeting your requirements, whether single piece or series, to meet the highest quality. Quality assurance We guarantee the quality of our work you through competent and motivated employees. Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Measurement Quality is our highest demand - measured with the latest 3D coordinate metrology. Frästeile max. Length 1020 mm max. Width 650 mm max. Height 500 mm Turned parts max. Diameter 600 mm max. Length 800 mm Flange components max. Diameter 600.00 mm max. Length 800.00 mm Screws, connectors, and gears max.Diameter 600 mm max. Length 800 mm
    > Read more
    Employees
    50 - 100
    Year of foundation
    2001
    Certifications
    ISO 9001:2008
    favorite star icon
    H. P. Kaysser GmbH + Co. KG

    For more than 60 years H.P. Kaysser GmbH + Co. KG has been belonging to the internationally accepted best sheet metal processors on the market. As a customer-oriented, family run medium-sized enterprise we produce with more than 300 dedicated employees at our locations in Nellmersbach (near Stuttgart, Germany) and Bistrita, Romania. Our strengths: An incredible versatility and an unique density of technology offer – paired with experience and technical knowledge of our well-trained employees. Our LernFabrik is evidence for consistent training and education schemes for our staff. 12 workcells guarantee the entire machining under one roof. Integrated system solutions complete the manifold programme with big advantages for our customers. It basically applies: Together with our customers we look ahead. Our customers benefit from the consolidated knowledge we established for years. We utilize our synergies and thereby extend your lead in market together. In collaboration our 3-F-formular applies: far – flexible- fair Our ambition: - best partnership - a long lasting, successful collaboration with all of our regular customers - discretion and exclusivity agreements if desired - mutual esteem and ethical behaviour Our motivation is the satisfaction of our customers.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1947
    Certifications
    DIN EN ISO 3834
    TP Suche Banner
    favorite star icon
    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008
    favorite star icon
    Berma Plaatwerk BV

    Sheet metal specialist Blech Berma is an all-round provider for sheet metal and lightweight construction from prototypes to medium series. The production of our core consists of laser cutting, punching, folding and welding. We also offer many auxiliary processes such as spot welding, rolling, inserts, saw grains and drums. Berma is also a real all-rounder when it comes to materials: from 0.5 to 12 mm, steel or stainless steel with brass or up to pre-painted plate, Berma has experience and in most cases also at home. We also handle a lot of pipes, tubes and profiles. Because we, we cannot have a wide range of products for our customers specializing in a limited number of operations or certain materials. That's why Berma Blech is your specialist for all-round sheet metal.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1986
    Certifications
    ISO 9001:2015
    favorite star icon
    TECHNOMETAL-Orfanidis EE (lp)

    We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest. The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product. We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service. And finally, we offer competitive pricing, guaranteed!
    > Read more
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    ISO 9001:2015
    favorite star icon
    Heckmann Stahl- & Metallbau Ost GmbH

    The Heckmann steel and metal Ost GmbH is a medium-sized company with 104 employees an integral part of the Oder region in eastern Brandenburg. Headquarters of the Heckmann Group is Dörverden-sleeves in Lower Saxony. Our fields of activity are: 1 Edelstahlbau including integrated pickling 2 Technological steel construction 3 Muffler and tank 4 Machining Our own design department completes the offer. Our company is certified according to DIN EN ISO 9001, owner of the manufacturer's qualification for welding of steel structures according to DIN 18880-7, class E for the base materials S235-355 DIN EN 10025 and CrNi. steels (DIBT), has the proof of suitability for Welding of railway vehicles and components according to DIN 6700, the authorization of the Germanischer Lloyd for welding of hull structures, as well as certification as a manufacturer and welding operation according to AD2000 Data Sheet HP0 and DIN EN 729-3 for basic materials S235-S355.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1993
    Certifications
    DIN EN 1090
    favorite star icon
    Punzonado y Láser METALKOR S.L.

    Metalkor was founded in 1999 and located in Jundiz Business Park in Vitoria-Gasteiz, ISO certified 9.001:2008, whose activity is the plate conformation without shaving starting. We offer service of sub-contraction from one piece to great series. Our long professional trajectory in the sector, allows us to have an important solution, seriousness and recognition between our clients. Metalkor has a highly qualified team and a great vocation to service for our client: This reason takes us to have a section of product development and assembly with experience and capacity to satisfy the client. Thanks to the fact that we have the last technology, in Metalkor we offer integral solutions in sheet metal transformation: - Laser cutting and punching. - Shearing and bending CNC. - Printing. - MIG-TIG welding. - Robotic Welding. - Precision boilermaking. We also take care of the processing and finishing of parts: - Galvanized, plated, blued, tempered and painted (epoxy or liquid), etc. and transport.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2008
    favorite star icon
    MTS Srl

    MTS srl, boasts a history of more than 40 years of activity in the mechanical sector. The company occupies a covered area of ​​10500 square meters in which it employs a staff of 70 employees who deal with a wide range of all processing phases, starting from the purchase of raw material, processing, until the delivery of the finished product, including possible superficial treatment .. In MTS we work in such a way as to perform mechanical machining in series, as well as turning, milling and large carpentry details, up to 10000 mm in length, all within a single plant, which is also expected to expand until 12000 square meters of surface area, to offer the customer an always better and more efficient service, satisfying at best the demands of the market. The particular welding processes, up to 12000 mm in length, are carried out by robotic systems, while the less invasive processes are performed by qualified personnel certified by the TUV with DIN 38-34 and DIN 18800 certification. To offer a complete service to our customers, the company is able to manage heat treatments such as: reclamation, standardization, annealing, hardening, cementation, nitriding and surface treatments such as hot and electrolytic galvanizing, burnishing, nickel plating and chrome plating. Thanks to the great versatility of the company, it is possible to adapt each treatment to the customer's product specifications
    > Read more
    Employees
    50 - 100
    Year of foundation
    1982
    Certifications
    ISO 9001:2008
    favorite star icon
    Alesco Muster-, Modell- und Prototy...

    We are your partner and service provider for model making, model making and prototyping.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications
    ISO 9001:2008
    favorite star icon
    MDG International LTD EU sales repr...

    Committed to providing our clients with high-quality, made-to-order machined components, MDG International has the expertise and technology to produce custom manufactured parts in a wide variety of shapes, sizes, or materials. Meeting the needs of diverse industries, our shop is well-equipped with top-of-the line CNC turning and milling machinery capable of holding precision tolerances down to. Our CNC turning machinery possesses magazine auto bar feeders and can manufacture parts measuring up to 60mm in diameter and 600mm in length. We can also chuck individual work pieces measuring up to 350mm in diameter.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2012
    Certifications
    ISO 9001:2015
    favorite star icon
    Viewtrade is Part of Viewsoft Srl

    Consortium of companies operating in the development of foreign markets. It acts as sales department for the export of a number of small medium-sized industries located in the Veneto region, all operating in the sub-supply in the mechanical industry. Our partners can offer, among others, the following main operations: • Turning • Milling • Grinding • Gear Making • Cutting and bending of sheet metal • Sheet Metal Forming • Assembly • Complete Subassemblies Operative Office in Corso Fogazzaro - Vicenza IT
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications
    DIN EN ISO 3834
    favorite star icon
    Kreutz & Mock GmbH

    About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire
    > Read more
    Employees
    20 - 50
    Year of foundation
    1934
    Certifications
    ISO 9001:2008
    favorite star icon
    Koutsogiannis LTD Steel Workshop

    Koutsogiannis LTD – Steel Workshop was founded in 1994 by Mr. Koutsogiannis and Ms. Christofi. The company has been active for 24 years in the fields of mechanical engineering and repairs, emphasizing in the high quality and fast delivery times. We are a company overlooking the sea, just 10 km from the port of Volos and above us the Mountain of Centaurs. We are a small team. Titles and positions are of secondary importance for us. Fostering long-term relationships with a diverse mix of latest technology and highly skilled employees. Building on our long experience and in-depth know-how proven in numerous reference projects. Team spirit is lived every day. We pull together in the same direction. Together we have overcome any economic crisis. We have no perfect marketing, but great products and a good advice for our customers. Our success is confidence in our people and not their control. Quality is the pride of every employee and not just a corporate goal. A machining piece which is supplied to the customer is at first a piece from Kostas, Giannis, Nikos etc., and only secondarily one from Koutsogiannis LTD. Customers are our friends and partners. Each employee is responsible for the future of Koutsogiannis LTD.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1994
    Certifications
    DIN EN 1090
    favorite star icon
    AW-KW Kunststoffverarbeitung & Werk...

    From the dataset to the assembled module, we offer complete solutions from a single source. Regardless of whether visible parts with sensitive surfaces, multi-components and components manufactured in our cleanroom, including medical components. From planning to production - all from one source. Our own tool shop guarantees short production times. Premium quality at a fair price from the south of Germany.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1977
    Certifications
    ISO 9001:2015
    favorite star icon
    ARUSO-PLAST Ruoff GmbH

    > Read more
    Employees
    50 - 100
    Year of foundation
    1967
    Certifications
    ISO 9001:2015
    favorite star icon
    Hans Gegner Werkzeugbau

    > Read more
    Employees
    20 - 50
    Year of foundation
    1921
    Certifications
    ISO 9001:2008
    favorite star icon
    Ungvári Works Kft

    UNGVÁRI WORKS Kft has been operating for 29 years. The company is a 100% hungarian-owned family business, it's founder and owner is Ferenc Ungvári. The company has 37 employees. The company's activity is the production of parts and components for the machine industry. Most of our product are manufactured in unique, small and medium quantities, our portfolio does not include mass-produced products. We supply 90% of our products to Western European machine manufacturers, we have clients in Germany, Austria, France, Switzerland and in Sweden. Presently, the production is performed in a plant with a floor space of 1200m2. In addition to our modern machinery and highly qualified colleagues, our production is supported by an integrated corporate management system, as well as by CAD and CAM softwares. Our processes are designed to satisfy the ISO 9001:2015 standard. Our activities: -machine parts and units production with CNC and traditional turning, milling and cutting technologies -welding -assembly -surface treathments -measurement -planning
    > Read more
    Employees
    20 - 50
    Year of foundation
    1990
    Certifications
    ISO 9001:2015
    TP Suche Banner