Find Plastics & Rubber / Plastic processing .

Welcome to Techpilot: Europe's largest platform for the manufacturing industry. For over 22 years, we have been connecting buyers with suppliers that are a perfect match for each other.

    Watch

    Techpilot Premium Member
    Glatec EOOD
    Glatec is your reliable partner for manufacturing subassemblies from metal. Glatec collaborates with companies from the electronic, machine building, home appliance and furniture industries. Glatec is one of the leading producers of fittings for beds and kitchen appliances in Europe. Our production is set up for manufacturing components and subassemblies in order quantities from 5000 to 500’000 articles. This allows us to react promptly and flexibly to your requirements. We focus on processing sheet metal, varying in thickness from 1 to 5 mm, coils up to 400 mm wide. We operate three automatic feed presses with a pressure range from 630 to 2500 kN. For separate operations, presses varying from 100 to 2500 kN in force are available. Stamping, bending and progressive dies are designed and produced in our own tool making shop. We also produce our automation solutions inhouse. For quality assurance 3D measuring equipment is available in-house. All CNC controls are linked into the company network. Programming of the machines is done with NX CAM Express.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    DIN EN ISO 3834

    Watch

    Techpilot Premium Member
    ZEIKOS GmbH
    ZEIKOS GmbH is a service provider in the field of industrial 3D printing from individual parts to series production. We work with PA, silicones and transparent plastic. Our advantage is that we can solve problems for our customers because we are both a design office with a small mechanical workshop and we have a network of manufacturing partners. We specialize in producing your printed parts with series finishes. From medical surfaces to surfaces for outdoor use. In addition, we can support you with the construction or simply with the data transfer for 3D models.
    > Go to profile
    Employees
    < 5
    Year of foundation
    1986
    Certifications

    Watch

    Techpilot Premium Member
    COMMSET LTD
    COMMTECH is trade mark of COMMSET ltd - Bulgarian engineering and plastic injection moulding company. COMMTECH supplies plastic injection parts and end products providing concept, design and production of tooling equipment for its clients. We process polypropylene /PP/ and polystyrene /HIPS, GPPS/, SAN, as well as specific technical materials like polycarbonate /PC/, polyacetal /POM/, ABS, PMMA, different polyamides /PA6, PA6.6/ with or without fiberglass /FG/ or other additives and other materials; we combine injection molded parts with additional processing of the injection articles like printing, assembling, gluing, polishing, painting, etc. We provide for the production of molds for our clients with our design solutions and technology to guarantee high productivity of the mold and optimization of the initial investment of the client . We provide serial production of metal parts /prototype and small seraial job/ - milling 3D or 2 1/2D. We could machine plastic, cupper, steel, aluminum. Our factory is in Industrial zone Verila next to Sofia, Bulgaria. We have 10 injection molding machines with all additional periphery for processing technical plastic material /Clamping force -30 tonnes, 50 tonnes and 100 tonnes, weight of the shot - up to 147 grams GPPS/ , tool shop in house and big store for ready parts. We keep for our regular customers parts in stock , to insure quick reaction to their orders. COMMSET LTD has the following certificates: ISO 9001:2015, ISO 14001:5015 and ISO 45001:2018 Our twenty years of professional experience and capacity for plastic injection moulding, metal milling and parts assembling, and highly qualified staff service put us in a good position to develop and broaden our business. For more information please visit our Internet site www.commtech-bg.eu.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Cellwar GmbH
    Plastic is our passion. Design our strength. In line with our guiding principle "Innovation in Plastics", we have been developing clever plastic solutions for the individual needs of our customers for decades. The high-quality plastic applications are produced exclusively by experts in our factory in Switzerland. 100% Swiss quality and genuine craftsmanship. No production line work. Reliability and timely delivery are very important to us. Cellwar is an owner-managed company. Benedikt Zenhäusern, Chairman of the Executive Board and Christian Poffet, Member of the Executive Board work day by day with more than 30 highly qualified and motivated employees on new ideas and solutions in processing technology. In order to get qualified junior staff, we directly train our own apprentices.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1906
    Certifications
    ISO 9001:2015
    We are a renowned Slovenian engineering company in the field of mechanical engineering. We deal with manufacturing and assembling machine components services and we also provide mechanical design services, all in the field of structural steel, stainless steel, aluminium and plastics. We are present in various sectors of the industry across Europe. As a family owned company we have been a professional partner for already 20 years between Slovenian manufacturing companies and European customers (Austria, Germany, Switzerland and Denmark), for whom we manufacture custom-made products in Slovenia. With our qualified experts we ensure correct technical production, planning, quality and timely order execution. Our advantage is that you as our customer have only one business partner who covers the entire Slovenian market for products ranging from 0.1 kg up to 50 tons. We also guarantee a timely delivery of your orders and the quality which are essential for long-term partnerships. As a modern company our goal is to meet the needs and wishes of our customers to the best of our abilities. TECHNICAL POSSIBILITIES Material: Metal, INOX, aluminium, brass, casting, plastic, etc. Cutting: Mechanical cutting, flame cutting, plasma cutting, laser cutting Welding: Steel, INOX, aluminium Maximum weight: 50 t Turning: CNC machines up to: Ø = 1000, L = 6000 mm CNC carousels up to: Ø = 6800 mm Milling CNC horizontal milling machines up to: x = 10000 mm, y = 4000 mm CNC vertical milling machines up to: x = 2000 mm, y = 1000 mm CNC portal milling machines up to: x = 15000 mm, y = 5500 mm, z = 4000 mm Eroding (EDM) Wire and spark erosion Grinding Plane grinding machines up to: x = 3000 mm‚ y = 1500 mm Round grinding machines (inside or outside) up to: Ø = 400 mm, L = 4000 mm Surface treatment Sandblasting, painting, galvanising, nickel plating, anodising, black oxidising, nitriding, hardening, etc. Quality control Quality measuring with special tools and 3D measuring machines Assembly of machined components From component machining to component assembly with 3D measurement protocols. Transport We can arrange the transport of ordered items from Slovenia to your company.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1991
    Certifications
    DIN 18800-7:20
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications

    Watch

    Techpilot Premium Member
    JüLo AG
    The company JüLo AG has already made ​​an excellent name in the field of plastic processing in all industries. We specialize in the manufacture and production of plastic components using the latest CNC milling and turning machines. The company JüLo AG manufactures from prototype to series production parts for our customers from all available plastic materials such as PP, PE, POM, PVC, PVDF, PTFE, PEI, PEEK, etc. For plating plants, we manufacture in addition to customer specifications plastic tubs and trim in the plastic welding process. We are happy to offer you the assemblies as a complete assembly with all electro-mechanical and hydraulic components. Due to our extensive customer base, we now have a number of standard components and standard parts in stock. These include, among others: - End caps PP-H for pipeline construction - Fixed point fittings PP-H for pipeline construction - Instrument Fittings PP-H for pipeline construction - Special fittings and special fittings - Reduction pipes for rod conveyor for all common CNC lathes such as spinners, Emco, etc. - Semi-finished products, among other things made of PP, PE, POM, PVC, PVDF, PTFE, PEI, PEEK, etc. - Plastic screws to DIN, special fasteners and special fasteners made of plastic
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1993
    Certifications
    ISO 9001:2008
    RTC Engineering is a globally operating technology company based in Slovakia, with a current team of over 140 professionals specializing in various fields such as Engineering, Precision Machining, Welding, Project Management, Assembly, Surface Treatments, and Integration. Our technological capabilities include: 12 CNC Milling machines (6 Five-Axis Milling machines) 5 CNC Turning machines 2 EMD Cutting machines Flat & Round Grinding Quality Inspection (2 CMM Carl Zeiss, Hexagon Scanning Arm, etc.) TIG Orbital & Manual Welding (20 welders) MIG Welding (20 welders) NDT Inspections Heat & Surface Treatments Assembly (Mechanical, Electrical, Pneumatic, Control Cabinets, etc.) Integration & Testing At RTC Engineering, we are committed to delivering high-quality, precise, and innovative solutions to meet our clients' diverse needs. Our state-of-the-art equipment and experienced team ensure that we can handle complex projects with efficiency and excellence. We pride ourselves on our ability to integrate various technologies and processes to provide comprehensive services from initial concept through to final implementation and testing.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    DIN EN ISO 3834
    The company Stöckl feast is a manufacturer and producer of technical plastic parts for industry and trade, as well as plastic parts for household, dry goods and toys industry. Our capabilities in plastic processing / injection molding department: - Plastic parts 1g - 1000g - Encapsulation of parts - No quantitative restrictions Plastic parts can be produced for all industries: - Household goods, decorative items, cleaning, kitchen - Technical parts such as valves, caps, caps, cups, straps, hooks, cans, lids, buffer On your behalf, we develop projects and solutions that meet your requirements are. By the company's own tool shop we are able to construct your injection molding tool itself and produce From the pattern idea to series production, we produce exclusively for you. The processing of thermoplastic polymers, fiber reinforced how-unreinforced, in all RAL colors orPantone colors can be, we are all the requirements you place on your plastic part requirements. Our additional production procedures, such as cutting steel pipes, powder coating, tube bending, and our assembly lines for partial and final assembly let us additionally complete your product. Direct Sales products are: - Protection against pigeons / doves protection of polycarbonate transparent with protected plug-in or assembly system - The highest power industrial floors made of PVC. For more information and pictures on our website: www.stoeckl-schmaus.de Other production: - Tube processing / tube bending - Powder coating - Assembly Own Products - Bird Control - Pigeon Protection - Floor - Massage Balls - Hedgehog balls - massage rollers - Promotional Products - Tubes Dreher - Promotional Products - Bottle Opener
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1985
    Certifications
    ISO 9001:2015
    GEK GmbH & Co. KG is a company that specializes in the construction of tools and in the area of plastic injection molding. With many years of experience and expertise, we offer tailor-made solutions for our customers, ensuring high quality and precision in the production of tools and plastic parts. We have an extensive range of machines in toolmaking and injection molding. - 2D/3D construction - Filling simulations/ delay calculations - Measurements on our 3 coordinate measuring machines - Processing of all thermoplastics (except PVC) and a wide range of elastomers - 1K injection molding machines (cavities up to 64-fold, shelf tool, family tool) - 2K injection molding machines (servo-driven index plates, turntables, folding) - physical thermoplastic foaming (MuCell®) - Overmolding of inserts - Assembly of components (gluing, printing, coating, laser marking, etc.) are also part of our extensive portfolio. For more information, please visit our website at https://www.gek-oelsnitz.de/ and see our attached company presentation and service overview.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1874
    Certifications
    IATF 16949:2016
    G&G Hardware GmbH is a medium-sized company with approximately 50 employees based in Nagold, 72202. Since 1988, we have been specializing in the production of high-quality connectors made of zinc and plastic for industrial and commercial use. Our pride lies in our state-of-the-art production system in our digital foundry, which allows us to manufacture our products without human intervention, ensuring a highly reliable and efficient process. We excel in delivering superior product quality, customer-oriented solutions, and dependable deliveries. Understanding that each customer has unique requirements, we provide personalized consultation and flexible solutions to best meet their needs. Our product range comprises a wide variety of top-notch hardware for doors, windows, and furniture, as well as innovative security technology. We also specialize in producing custom-made solutions tailored to our customers' specific demands. At G&G Hardware, customer satisfaction is at the core of our operations. We take pride in fostering long-term partnerships with our clients and constantly strive for improvement and adaptability to meet changing market conditions. Our commitment to quality is certified by ISO 9001, ensuring meticulous inspection of all products and adherence to the highest standards. We aim to deliver products of utmost quality that guarantee safety and durability. Innovation is integral to our company. We continually invest in process improvement to remain at the forefront of technology and offer innovative solutions. Modern technologies enable us to work precisely and efficiently, developing customized products. Environmental protection is of great importance to us. We prioritize eco-conscious manufacturing processes and resource-efficient technologies to minimize our ecological footprint. Our digital production facility, capable of unmanned production, enables efficient and sustainable manufacturing. Our customers have trusted us for many years, and we take pride in providing references from renowned companies. Their satisfaction is our utmost priority, and we strive to build long-term and trustworthy partnerships. If you are in search of high-quality and reliable hardware and components, G&G Hardware is the perfect choice. We warmly invite you to contact us to learn more about our company and products. Feel free to visit us in person or reach out via phone or email to discuss your requirements. G&G Hardware GmbH - Your reliable partner for top-quality zinc die-casting and plastic injection-molded products.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1988
    Certifications
    ISO 9001:2015
    The Röchling Group is a global plastics group. With some 11.000 on the workforce at 91 locations in 25 countries, Röchling ranks internationally among the leading enterprises in the field of plastics processing. With their thee divisions, Industrial, Automotive and Medical the Group, with its companies on the American, European and Asian continents, generates an annual turnover of around 2.6 billion euros. Within the Industrial Division, the Product line Machined Components has over 800 employees and is the world-wide leader in machining plastics. The flexible companies have specialized in the manufacture of high quality machined components for virtually every sector of the capital goods industry. We develop optimum solutions jointly with the customer, then realize them efficiently. Our products are used in nearly all industries like medical, food, intralogistics or mechanical engineering just to name a few. Flexible, powerful, precise The network of 18 machining companies of the Röchling Industrial provide you with virtually unlimited processing possibilities and a leading manufacturer with one-of-a-kind installations and machinery. We have invested in the most modern technology and thus, provide top quality with reliable tolerances and outstanding surface quality. From micro maching (0.5mm Dia.) up to large volume components. Our modern, high-performance CNC machining centres and large-size CNC milling machines offer the possibility of producing products in the largest dimensions with close tolerances. For our customers this means: • High degree of material utilization • Reduced assembly times • Fewer welding seams • Narrow length tolerances Our high-precision CNC systems are equipped with dry and wet processing as well as internally cooled tools. This enables production of complex geometries and narrow tolerances, while at the same time maintaining a high degree of surface quality. In addition, we are also able to perform 5-axis machining. Round components Ø up to 3,500 mm, larger dimensions on request. We have invested in the latest technology and deliver top quality with reliable tolerances and excellent surface quality. We also offer processing of other materials in combination with machined plastic parts. Currently we have, among others, more than: • 100 CNC milling machines • 50 CNC lathes • 15 automatic profiling machines and a wide variety of profile extruders with over 600 tools Combined components The workflows in our machining companies are also designed for the production and assembling of complete assembly groups. Thus, thread inserts, ball bearings or other inserts can be added in further processing steps and combined with other components into complete assembly groups. https://www.roechling.com/industrial/products/thermoplastics-machined-components
    > Go to profile
    Employees
    > 1000
    Year of foundation
    1916
    Certifications
    EN 15085
    Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1966
    Certifications
    ISO 9001:2015
    Rudi Göbel GmbH & Co. KG, based in Helmbrechts, is managed by owner & managing director Frank Pichler. The company was founded in 1957 and, with its three locations and 500 employees, specializes in the production and sale of plastic, metal and silicone solutions. The extensive product range, as well as our own tool shop with over 100 specialists, includes precision components, weight-reduced high-performance components and system solutions for displays and controls. The offer is aimed primarily at power electronics, the automotive sector and industrial technology. The high-quality and innovative products from Rudi Göbel GmbH & Co. KG impress customers from all over the world. In addition, the company offers a comprehensive range of services that combines all development, toolmaking, manufacturing, finishing and assembly work. You can find out more about the services offered by Rudi Göbel GmbH & Co. KG on the company's website.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1957
    Certifications
    IATF 16949:2016
    Containers and tanks in all materials, shapes and sizes e.g.: GFK (glass fibre reinforced plastics), PE-HD, PP, PVC, PVDF and as composite material like PVDF/GFK or PP/GFK carried out as round, rectangular, oval or triangle containers / tanks, also with insulation and / or cooling and heating mechanisms for special assemblies. Milling and turning parts made of all plastics (precise CNC-machining of PP, PE, PVC, PVDF, PTFE, etc.)
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Techpilot Premium Member
    ENKO d.o.o
    We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    We undertake the assembly of new systems incl. Media connections, de-remontage, maintenance and service, conversion work, retrofit, welding work E / MAG / TIG. Modifications. Position of construction management and assembly personnel. Our staff is equipped with journeys, staff, as well as crane certificates and current welding certificates.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2005
    Certifications
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2018
    Certifications
    ISO 9001:2015
    C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Go to profile
    Employees
    > 1000
    Year of foundation
    1806
    Certifications
    We offer you plastic injection molding of the highest quality at fair conditions. In the injection molding process, plastic granules are plasticized and then injected into a mold under high pressure. In this way, plastic parts between 0.1 g and 2500 g can be produced quickly and inexpensively in large, medium and small series. Due to our customers in the automotive and sensor technology industry, our production is designed to guarantee all the highest quality standards. With the help of the most modern processes and technical systems, we guarantee very high dimensional accuracy, precise weights and accurate colouring. We also help you to optimize the mechanical properties of your product by selecting the optimal material and any post-processing steps together. Many years of experience with a wide range of products have allowed us to continuously optimize our processes. This enables us to react flexibly to your wishes and to produce a large variety of articles. Our interdisciplinary team examines your molds and products in order to develop an optimal manufacturing process. This reduces waste and process costs, so we can offer you a fair price-performance ratio.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1990
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    ALLTECH SRL
    Technology: Development and production of injection molded parts from plastic materials, polymers, rubber and engineering plastics. In the machinery you will find u.a. Injection molding machines for two-color and multi-component injection molding, we also have the patent for the UICEG process In order to be able to offer our customers a ready-to-sell product, the devices of the manufacturing process were automated with the help of robots and manipulators and completed with equipment for decoration, cutting and packaging (blister packaging). From the first approach to the planning, our customers are accompanied by professional third parties, if necessary also with graphic and 3D drawings (CAD-CAM), in order to obtain the desired product in the best possible way by means of appropriate material studies (if necessary a formulation for specific materials is developed). as well as the support in the production of the tools (molds and others) to be able to realize. The aim is to receive a handcrafted product that meets market and / or customer needs.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2010
    Certifications
    IATF 16949:2016
    Precision rotary parts, - milling and ground parts (Ground parts) - Transmission shafts (drive shafts) to 1500 mm, hollow shafts, rotor shafts - Flanges (Intermediate), bolts, fittings, machine components - Cells wheels, worm shafts, knife shafts. - Guide rails, shaped pillars Machine Knives Knives industrial Press Brake - Perforating, squeezing knives, shear blades, packaging knives. Knives for plastics industry, mill knives, textile knives, sheeter knives, crush cutter, foil knife, knives, tungsten carbide blades, serrated blades, welded-on blades, slitter knives, Plotter and other machinery knives. Circular knife round knife Circle diameter (round blade) are rotating tools that can be (with counter-blade) was used with a knife cut or shear cut method. Circle diameter (round blade) can be produced for different applications from different materials (stainless steel, tool steel, HSS or stainless steel).The particular design can customized (eg ground on both sides, toothed, 2-wading, etc.). There arise because different names such as, crush cutter, top cutter, bottom cutter, pen-knife, plate diameter, perforating circular knives, rotor diameter, roller blades, etc. In addition, we also manufacture the knife holder and knife shafts and induviduelle cutting devices. The regrinding of circular knives is almost always worthwhile. Punching tools Punching diameter: Punching knife and cutting die are made from solid steel (eg tool steel 1.2379). The blades are hardened and ground. Punching blade made of solid material, are especially suitable for punching work with very precise contours as well as for long-term use, as they can be reground. Made of solid steel, we can also very small and precise punching knife and punching iron manufacture (eg samples dancing). Dies: We manufacture cutting knife and cutting dies from hardened steel strip and for a variety of punching tasks.Depending on the application, band knife made of spring steel, carbon steel, tool steel, stainless steel. Compared with the cutting knives made of solid steel, they are affordable and are suitable especially for disposable knives as well as large punch surfaces. We have stamping tools for individual tasks. - Cutting die, die cutting knife, cutting knife for test specimens, punches, punching, stamping dies, Steel rule dies, punches, - Cutting rollers, cutting mills, crushing blade - Punches and dies, punches, forming punches Flat - and cylindrical grinding - Surface grinding, surface grinding up to 3000 mm length - Cylindrical grinding up to 400 mm diameter - Fine grinding, lapping, polishing - Carbide Grinding Roll manufacturing roll grinding and - Rolls, roll cores, drive rollers, winding rollers, form rollers, fluted rollers Nippers, the cutting rollers, roll forming, turning rolls <
    > Go to profile
    ZPTS befasst sich mit der Produktion von Bau- und Einzelteilen aus Kunststoff. Wir bieten unseren Kunden hochwertige Waren an, die mit ihren Anforderungen und Erwartungen übereinstimmen. Qualität ist für uns immer eine Prioritätssache und spiegelt sich in all unseren Tätigkeiten wider. Dieses Ziel verfolgt auch das anhand der ISO-Norm 9001:2008 umgesetzte Qualitätsmanagementsystem. Unsere Mitarbeiter identifizieren sich mit dem Unternehmen und erfüllen alle Verpflichtungen in Übereinstimmung mit ihren Fähigkeiten und beruflichen Kompetenzen. Das Qualitätsmanagementsystem wird hinsichtlich seiner Wirksamkeit stets weiterentwickelt, damit unsere Kunden immer zufrieden sind. Wissen, Konkurrenzfähigkeit, Partnerschaft und redlich angewandte Grundsätze.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1993
    Certifications
    ISO 9001:2008
    Ideas made of plastic — this motto characterizes the demands and performance of our company. Tolges products are therefore used worldwide in many areas of everyday life, trade and economy. For over 40 years, our 75 qualified employees have been providing creative plastic ideas, individual productions and comprehensive solutions — everything from a single source on request. The company's own development/design, toolmaking, injection molding and assembly departments guarantee customers consistently high quality. In our production, we process almost all common and known thermoplastics and elastomers. These include ABS, EVA, PA, PC, PE, PEI, PMMA, POM, PP, PS, PVC, TPE and TPU. Thanks to our work for a wide variety of industrial sectors, we have considerable know-how in the processing of technical plastics. In the 2-component process, a hard component (plastic) is combined with a soft component (elastomer) to form a composite part in a joint synchronous process. This process allows the physical properties (strength, weight, etc.) of materials to be optimally combined. > Machine clamping force: from 25 t to 1,000 t > Spray weight: from 1 g to 8,000 g > Part dimensions: up to 1,300 mm (W) x 2,000 mm (L) > 2-K syringes with plasma aftertreatment > Assembly of components > Pad printing, screen printing, embossing
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1974
    Certifications
    We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1986
    Certifications
    ISO 9001:2015
    As long-standing employees of mbb Maschinenbau Bogensberger, we took over 20 years of contract manufacturing of precision components in 2022 under the new name “mbc Maschinenbau Coban”. We are appreciated as an experienced supplier and contract manufacturer for CNC processing parts in Austria and in areas of Germany. The following keywords present our company: • Fair market prices thanks to modern and automated machinery • On time delivery • High-precision error-free CNC processing through integration of the CAD/CAM process chain • We are certified according to DIN ISO 9001:2015 • Compact structure/ short and fast decision-making processes • Our range of materials includes all materials, in particular steel, titanium, aluminum, copper, plastics, carbon fiber, metal matrix composite materials, etc. — we would be happy to test the materials you need too!
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2022
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    NMH GmbH
    Where is the highest quality, process reliability, smooth operation and process experience matters, develops and implements custom solutions NMH. Perfectly tailored to the individual customer requirements. With about 100 employees at its 88 367 Hohentengen we are marked by a performance-, medium-sized business culture. With qualified staff and modern technology, we ensure the expectations of our satisfied customers with our solutions. The 100 menstrong special machine and plant engineering company NMH GmbH + Co KG in 88 367 Hohentengen is in Upper Swabia, district Sigmaringen, about 30 minutes away from the Lake of Constance and adjacent to the districts of Ravensburg, Biberach an der Riss, Balingen and Lake District.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1943
    Certifications
    ISO 9001:2008
    Globus Thermoplast GmbH has been firmly established in Schwentinental near Kiel for many years now, where it has specialised in the extrusion and processing of high-quality thermoplastics. We supply a wide variety of customers from a vast range of industries and regions with semi-finished products and machined components. Globus combines the innovative power of a modern German manufacturer with the down-to-earth nature of a tradition-conscious company with future-oriented strategies. Our many years of experience in plastics processing form our solid foundation.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1973
    Certifications
    ISO 9001:2015
    We are a Dutch contract manufacturer/ product development partner, specialized in developing, manufacturing and assembling hardware products made of steel, aluminium or plastics, in Shanghai, China. We offer multiple manufacturing processes and in-house assembly under ISO certified processes so that you do not need to worry about the quality and not about your IP. We manage our own in-house assembly just outside of Shanghai and our suppliers are available within a 300km radius around Shanghai so that we can monitor and control them. Our in-house engineers can support you to optimize your design for mass production. In case you also need design support we can also offer you a solution through our design partners. Electronics and Software are not within our in-house capability but we have local partners who can support us here. We are focusing on the following sectors: Medical, Lighting, Green-Energy and general industry. Apart from most manufacturing techniques we also offer several surface treatments and in-house assembly so that we can guarantee the IP of your product during production in China. Please contact us by phone or email. Our customer support team is available mo-fr in Haarlem, the Netherlands.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1998
    Certifications
    ISO 9001:2015
    consultation Plastic is not just plastic, the choice of material plays a crucial role in the strength and durability. Through our many years of experience, we find for their application of more than 75 material variations the suitable plastic. We camp for you! In our warehouses, we keep your call orders ready, thus we guarantee maximum flexibility and shortest delivery times.
    > Go to profile
    Employees
    Year of foundation
    1999
    Certifications
mehr anzeigen