The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.

Öztug manufactures rubber molded parts (with and without metal attachment), plastic injection molded parts (with and without metal attachment + 2K) and bent wire parts with its own tool shop. We are already working with well-known companies such as Toyota Boshoku ,Webasto Convertibles, Sew Eurodrive , WOCO, Stabilus GmbH, Hydac Filtertechnik, Conductix-Wampfler, Grammer (Bursa) and Kiel. Our services begin with the first hour of development and extend to series production. Thanks to our mold construction, we can produce prototypes at short notice. We are convinced that we are a suitable partner for you with our vertical range of manufacture and our high level of quality. 1990- Esatablishment; machine-free prodcution was realized. 1997- Rubber machinery investments were made. 2002- Toolshop investment was made. 2003- Plastic Injection investment was made. 2005- Production started in NOSAB. 2006- ISO TS 9001 Certificate was obtained. 2007- Production started in Adapazarı. 2011- ISO TS 16949 Certificate was obtained. 2013- Production started in HOSAB. 2018- IATF 16949 Certificate was obtained. 2018- Lean management working was started. 2018- ‘’design Center Approval’’ was obtained from the Ministry of Science,Industry and Technology

What we offer We are professionalized in job shop manufacturing and sourcing simple stampings to complex assemblies, as well as in the production of simple and complex punching tools. As we attach great importance to "Swiss made", all work processes in domestic be made, either directly from us or from selected partner companies.

KREA AS group of companies specialised in Laser cutting, Welding and sheet metal fabrication. We offer a variety of services and materials in order to precisely fabricate, assemble and package metal products and parts to your specifications Our core business is welding (MAG,Laser,TIG), laser cutting and sheet metal fabrication, CNC machining and painting We are fabricating Construction machine parts, Welding cabins, welding robot platforms, Hydraulic oil Reservoirs, Frames, Burner casings, breaker bodies, filter housings, fan bodies, Cabinets, Electrical cabinets, Welded frames, Skids Welding (Laser, Robot, MIG, TIG, Electric Arc) Laser cutting parts and services Pipe cutting, bending and forming Sheetmetal cutting,bending,folding and fabrication Welded machine parts and assemblies (Structural steel and also Stainless Steel ) and deburring CNC Machining, CNCTurning and CNC Horizontal Milling and Grinding Wet Painting (Epoxy, 2K primer, Zinc Primer, PUR Acrylic etc) Powder coating automatic surface spray line ElectroZinc Galvanisation, Hotdip galvanisation Automation projects and machine design and building COMPANY OVERVIEW : KREA Established in 2004. Locations : IZMIR / TURKIYE (TR-035730) 30000 sqm Turnover > 23 Million EURs Personnel > 500 Certificates : ISO EN 1090 EXC 3, ISO 9001, ISO EN 3834-2 (eq DIN 18800-7), ISO 9606, ISO 45001, ISO 14001 , AD 2000 Merkblatt, PED 97/23/EC pressurised vessels We have two IWE International Welding Engineer in the company. WPS and PQR and also NDT (UT/MT/LPT etc) Target Market : Compactors, Excavators, CNC mAchines, Marine, Offshore, Automotive factories, Cement Industry, Earth moving machinery, Structures and construction, Welding robot cells, Hydraulics Mr. Tansu OZCELEBI Tel: +90 232 877 11 99 Fax: +90 232 877 04 90 email: sales@kreamakina.com

Aussafer Due is an international leader in metalworking using high-technology processes. By combining innovation and professionalism over the years, it has followed the evolution of the sector, becoming a real reference point for the cutting and manufacturing of sheet metal Technology : Laser cutting 2D, Laser Cutting 3D, Punching, Water jet cutting, Bending, Forming, Fabrication, Welding, Assembling, Machining, Painting (powder and liquid coating), Surface finishing. Applications : electric industry, automotive, cabinets, conditioning, refrigeration, food industry, furnishing, farming machines, textile machines, laminations for electric motors and generators. Location : North-East Italy between Trieste and Venice, Dimensions : 30000 square meters, 100 employees. Our mission is to completely satisfy our customer’s needs. In a very dynamic market environment, we seek to offer a service of excellence in high-technology cutting of sheet metal, offering complementary services that integrate the product completion process. The quality of manufactured products is constantly monitored through the tools available and our Quality Assurance process & procedures. The final evaluation is conducted through sophisticated quality control equipment. Advanced IT. Management is common place, allowing greater flexibility in production systems, design and made -to-order work processes which makes our standards extremely adaptable and competitive. The flexibility of our production system, along with our highly skilled personnel and state of the art machines; this makes Aussafer capable of meeting the needs of clients from many different industries. Aussafer Due, with its broad vision, has always been committed to protecting the environment through control of emissions and disposal of resulting materials, related to the manufacturing activities carried out. Aussafer Due, in carrying out its operations, pays the utmost attention to compliance to regulations both in regards to hygiene and safety in the workplace.

Hightech from Venice You have a product idea ... .. we support you in realizing your components. Veneta Stampi Srl is a specialist in the cold working of sheet metal and the experience we have gained since 1971, combined with the latest 3D technologies, enables us to manufacture tools and components for a wide variety of industries. We offer all common metalworking processes from a single tool, from stamping and forming technology to deep-drawing technology. We guarantee optimal quality and delivery for almost every form of metal processing. Our complete service from construction to final assembly allows us to offer you a complete guarantee of quality and flexibility. Founded in 1971 by Vittorio Furlan, Veneta Stampi Srl has developed into a renowned medium-sized family company with around 50 employees.

Dear Ladies & Gentlemen, as a family from the metal-working industry, we want to introduce you to our wide range. The versatility of possible solutions is one of our strengths and allows flexible solutions to complex challenges. So we have only the necessary know-how through various practices, such as CNC turning, CNC milling, wire EDM, etc. We combine the latest technology with years of experience and guarantee you reliability and quality. The company Heinz Knöpfle GmbH was founded in 1979 by Mr. Heinz Knöpfle as a company for special machines. The company is located in Schwabmunchen / Schwabegg, about 30km south-west of Augsburg. We supply our products mainly to a solid customer base with great success, we would like to introduce our company. Proof of quality: Through the coordinate measuring machine Crysta Apex S544 Mitutoyo, we can now also supply with measuring protocol the manufactured parts. CNC Turning: With our CNC lathes we can to edit 65mm rotary parts of the rod automatically and completely. The machines are equipped with a 12 - equipped trade revolver and with driven tools. A counter-spindle and Y-axis enables short cycle times and make some cases further machining on a milling machine unnecessary. We manufacture precise and sophisticated turned parts as individual parts, small or large production runs with short delivery times and consistently high quality. CNC Milling: Years of experience, modern production techniques and machining centers, highly qualified and motivated employees are the basis of our performance. This allows us to present the desired results our customers quickly and inexpensively. Working in oscillation mode allows us to equalize loading times and increase output. Saws: The basis for a safe and good machining is not only a good material quality, but also a good blank. With our cutting precise cuts are realized with short cutting times. We saw our own production as well as in wages for other companies. We offer to Sägezuschnitte from € 0.03 per cut. The range of materials ranging from mild steel on non-ferrous metals to stainless steel. Our state of the stocks enable us short delivery times for their Sägezuschnitte. Welding: In order to offer production from one source, we have a welding robot available.Through this, a constant quality is ensured. Device & toolmaking: With our well-stocked machinery and many years of experience in tooling, we are able to create bending, punching and stamping tools. Our fixtures and special machines find their use in various industries. Depending on customer requirements, we offer ready-made parts or just the tool. The further refinement of the products we take over for you. The parts production in the field punching, bending and stamping can be held up 150to in-house. Try us, we look forward to your orders! Sincerely, Heinz Knöpfle Susanne Knöpfle Andreas Knöpfle Christian Knöpfle Management Management Management Manage...

The Protected Workshop Wr. Neustadt is a company that are in the predominantly people who can be active on the labor market due to the severity of their disability or not, or not again employed. Today we employ approximately 140 employees. The rate of disability is over 80%. The Protected Workshop Ges.mbH faces for over 25 years as a partner of the economy. The use of advanced machinery and equipment, the good and thorough training of all our employees and strict quality control ensure "the highest quality from Austria". Of course, we are certified to ISO 9001-2008. We hope to have piqued your interest and look forward to your inquiries. But you can convince any time you personally (by appointment) in our house of our services and modern machine park. The core product include various types of car trailers, which one sells well over Austria various hardware stores.With over 5,000 followers one was sold in 2011 by the way the second largest provider in Austria. The economic production of the pendant are the latest machines for sheet metal machining (punching, bending, folding, welding) and a complete assembly line available. The Locksmith department is well equipped for the welding of steel, aluminum and stainless steel materials. Also well placed is the Protected Workshop punch in the area where plates with up to 160 tons press force on a hydraulic press or eccentric presses can be punched. For sheet metal bending one still has a CNC press brake with 160 tons press force and a new bending machine with which you can turn up to 3mm (aluminum). As a powerful medium-sized company we also perform a variety of tasks such as installing, assembling, checking, labeling and packaging for different industries (electrical, plumbing, construction and automotive). For some 15 years, it is also active in the field of mechanical manufacturing.With a total of 10 CNC machine tools to craft series 100-80000 piece. Here, materials made of steel (S235, 16CrMo4) or cast steel are processed to 80 percent, but also stainless, brass or aluminum are becoming commonplace. In order to manufacture productive our machines are designed for performance, speed and batch processing.

Altrough our company was established in July 2011 by Mr. Brečko and Mr. Neff, we already have 50 years experiance in manufacture, as we are one of the original companies of former TAM Maribor. Producer of trucks, buses and engines. Both directors of B N M d.o.o. have considerable experience in establishing and managing company in the automotive industry. Under the authority of previous employers are jointly set up a successful company Starkom Ltd. Maribor, which was in their mandate effectively managed and organized. Mr. Brecko was ahead of its engagement in Starkom deputy director in Unior – Strojna oprema. Mr. Neff was by Daimler in Stuttgart for 20 years and he has successfully led the planning of investments in the field of processing and welding of sheet metal. WHAT WE CAN OFFER: 1. Planning of transformational technology for sheet metal products, tubes and profiles: - Project execution from planning technology, tools and equipment, to the initiation of production - Determining the required technology of the elements and their assembly - Manufacturing the tools and resources 2. Shaping of sheet metal - Sheet metal forming by using 350 – 16.000 kN presses with working table up to 2500 x 2500 mm - Bending into various profiles on hydraulic bending machines with max. length of 3000 mm. 3. Slitting and bending tubes, tube assembly composition - Welded or seamless tubes - Slit and bent tubes are assembled into compositions 4. Manual and machine treatment of sheet metal products - Manual and machine processes on sheet metal product are carried out by means of removal, welding and shaping - These processes are primary used for the manufacturing of semi-finished products, which represent individual elements or units in the assembly of truck and bus chassis. Our products appear in the final products renowned companies worldwide. These include Daimler Benz, Steyer Puch, Renault Case... We can proudly boast our competitiveness. We have improved the quality of our production process, products and post-sale activities, but are continually monitoring customer satisfaction and taking the necessary measures. We are specialist for car body production welding and assembly, like following: - spot welding of the constituent elements - lines for the cab assembly - welding and door assembly - measurement machine

The Heckmann steel and metal Ost GmbH is a medium-sized company with 104 employees an integral part of the Oder region in eastern Brandenburg. Headquarters of the Heckmann Group is Dörverden-sleeves in Lower Saxony. Our fields of activity are: 1 Edelstahlbau including integrated pickling 2 Technological steel construction 3 Muffler and tank 4 Machining Our own design department completes the offer. Our company is certified according to DIN EN ISO 9001, owner of the manufacturer's qualification for welding of steel structures according to DIN 18880-7, class E for the base materials S235-355 DIN EN 10025 and CrNi. steels (DIBT), has the proof of suitability for Welding of railway vehicles and components according to DIN 6700, the authorization of the Germanischer Lloyd for welding of hull structures, as well as certification as a manufacturer and welding operation according to AD2000 Data Sheet HP0 and DIN EN 729-3 for basic materials S235-S355.

CNC contract manufacturing, welding assemblies, individual parts, serial parts ORGANIZATION PLACE: GERMANY- Order logistics and deliveries through our own group transports up to twice a month. Goods are delivered with a German invoice, without further or hidden costs. PRODUCTION LOCATION- Bosnia and Herzegovina, EX-YU Läder MANY POSSIBILITIES- We combine our own production with our subcontractors' capacities in a pure source. Parts are carefully checked and only then delivered! STORAGE- In Germany (75417 Mühlacker) we can store any batches in advance, check them again and deliver at short notice! EXPERIENCE- Long-standing (over 20 years) experienced employees in various manufacturing processes. We have been delivering to our German customers for over 5 years. RESPONSIBILITY- Goods we deliver are insured, but we always accept sensible complaints and find a solution that suits everyone! Over 30 companies in Germany procure goods from us. POSITIVE THOUGHTS - our customers are slowly becoming our personal friends! Working with friends is fun, security and trust.

MAG Ltd is company registrated by the Regional Court in the town of Kjustendil in 2003.The company is the legal successor of the industrial equipment, the manpower, the technology, the engineering design and documentation of the “Central Repairing Base –BD Ltd” in the town of Bobov dol . The Base has 50 year tradition in manufacturing of a great range of spare parts and a great variety of ironware used in the mining equipment, the installations and the electrical machines used in the collieries. The period since 2003 up to now has been characterized by the expansion of the products range, the variety of spare parts and services, offering competitive price and a high quality of maintenance. Guarantee for high quality services is the available manpower, the long-term experience they have and the equipment in use: The industrial and engineering buildings are situated on an area of 6290 square meters and the build-up air-space of the buildings is 88060 cubic meters .There is a suitable infrastructure: electric supply of 1000 KVA and voltage of 20 KV, a railway connection, which services the production premises, water supply and a parking lot. Machines and equipment having the capacity to employ 500 people. The production base of “MAG Ltd” is situated in 9 workshops, each of them being 18 meters wide and 70 meters long. There are seven bridge cranes which can lift up to 8 tons, one crane lifting up to 12,5 tons and five smaller telpher cranes. In 2015 the company made substainal investment in new production machines: CNC TURNING CENTER LATHE - 5 pieces with variety of diameters for production, HORIZONTAL BORING MINING CENTER - a machine which can process details up to 11.5 tons.

Valeri srl was registered with the Chamber of Commerce, Industry, Crafts and Agriculture of Forlì Cesena in 1961, starting as a sole proprietorship. It then moved to the Municipality of Cesena in the mid-1960s, in the current production unit, turning its artisanal activity to iron and sheet metal processing. The experience gained and the motivated family management then allowed the company to develop and specialize in the production of chimneys, chimney terminals and chimneys. The main processing phases are the cutting of the raw material (coil strip of galvanized sheet, stainless steel or copper), the molding or deformation with steel molds mounted on hydraulic presses, the assembly and assembly of the various terminals through different welding procedures, the appropriate packaging on pallets for shipment throughout the country by own means or with national couriers. All the items we produce have the “CE” mark and comply with the regulations: EN 1856-1. All our commitment is aimed at satisfying the needs of our customers and thanks to the fact that many of our customers and thanks to the fact that many of our processing processes have been automated, we are able to supply them in a short time. This allows them to be more competitive on the market, in a company now based on urgency and on promptly satisfying the needs of buyers, without neglecting the quality of the products. The company has developed over time and is constantly evolving. It applies increasingly advanced production technologies and new certification criteria that allow its products to meet a high quality standard.