Watch

    Techpilot Premium Member
    PMT GmbH
    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    QDP B.V.
    From our own (100% WFOE) production plant in China, we provide in-house manufacturing of injection molds and injection molded products. This is the only way how we can secure the quality and protect your Intellectual Property, so you can rest assured that your product is in safe hands. QDP has more than 20 years experience in injection molding and product development.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2007
    Certifications
    ISO 9001:2015
    With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment. Our mission We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products. We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2018
    Certifications
    ISO 9001:2015
    When working in higher levels we are RELIABLE yours. Tiger Lift is a subsidiary of the company Paksan in Turkey. Our parent company is 32 years active in the Turkish market for metal processing and is represented in more than 50 countries. Tiger Lift is a further development of the Turkish mother and is active in both down- and upstream active activities for metalworking and for crane and lift design. We offer extensive services around the material to metal as well as in the processing of. We also use our expertise in materials processing as well as in mechanical and automotive engineering to our customers reduce anew with tailored solutions always ahead. We are of the opinion that German craftsmanship is combined bring additional value with our international experience to our customers. We do not only follow the latest developments in our fields, we also develop self-innovation. Especially in mechanical and automotive engineering company Paksan has its research and development work massive boost to lay already the breeding ground for the work of tomorrow. Also in the metalworking sector, we are constantly keen to improve and expand our expertise. We are in constant contact with renowned research institutes in Turkey. This high demand is supported by the large number of certificates that have gotten our products. We strive every day with our successful staff who is always trying to improve and our products, yet offer you better services. When working in higher levels we are RELIABLE yours.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2013
    Certifications
    EN 15085
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    DIN EN 1090
    PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1913
    Certifications
    ISO 9001:2015
    Maso attend to direct contacts with the foundries and gives the customer to pick up the possiblity, his requirements for all steel castings as well as Grey cast- and Spheroidal graphite cast iron, Aluminium and its alloys castings directly with it with the supplier in Turkey and China. Unknown intercession offices slip it. As production processes to the disposal are Sand casting -machine moulding, investment casting, die-casting for low, middle and big deries, roughly and ready processes. Maso takes over the first sample care until the series maturity. The customer can order directly after it. The same profile offers Maso for drop forged parts, sheet metal stamping parts and vehicle rims.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1995
    Certifications
    ISO 9001:2008
    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications
    As a system supplier for electromechanical assemblies, we manufacture plastic and metal components using hybrid technology. This means that we concentrate on the production technologies of plastic injection moulding and punching and bending of metal components. The advantage for you is that you can obtain ready-assembled assemblies of the most diverse production processes from one source. By moving Friedrich Joerg GmbH in 2016 to newly built production and office premises, we were able to create a capacitive buffer. Thanks to a high degree of automation, we can offer you particularly competitive prices. We manufacture manually in small series up to large series fully automated and pre-assemble all components for you. In short, we adapt flexibly to your requirements. We provide support as early as the product development stage in order to take into account quality, cost and tool-specific aspects in the early phase. We manufacture the necessary tools or devices in our own tool shop. This also allows us to increase our flexibility, for example in case of short-term changes. Furthermore, we also offer finishing processes such as: printing on plastic parts (cliché/pad printing), hot foil stamping for a particularly noble appearance of the products, machining and ultrasonic welding. It goes without saying that we are certified according to ISO 9001:2015 and deliver a very high and consistent quality. We would be pleased if you contact us. categories: Electromechanical assemblies; Foil hot stamping; Customised plastic mouldings; Plastic optical fibres; Optical fibre components; Optical fibre systems; Optical fibre technology; Optical fibre transmission systems; Pre-assembly Assembly of small parts for industry; Assembly of plastic components; Assembly of mechanical components; Stamp-bending parts made of stainless steel, non-ferrous metal, steel; Stamp-bending tools; Connectors; Connectors for surface mounting; Complete plug connections; Pad printing; Thermoplastic precision mouldings; Thermoplastic overmoulding with plastic; ultrasonic welding of plastics; overmoulding tools for insert parts; 3-D MID components; connecting terminals for power cables low voltage & high voltage; component assembly; die casting; mould making; housings for the electrical industry; terminals for electrical cables; plastic injection moulded parts; plastic injection moulded parts with metal insert; electrotechnical plastic parts; technical plastic parts; plastic processing; multi-component injection-moulded parts; plastic-injected metal parts; product development; prototype construction; terminal blocks; technical injection-moulded parts; thermoplastic elastomer (TPE) moulded parts; jig and fixture construction; toolmaking; two-component injection-moulded parts; Imprint: https://www.friedrich-joerg.com/kontakt/impressum/ Privacy policy: https://www.friedrich-joerg.com/kontakt/datenschutzerklaerung/
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1920
    Certifications
    ISO 9001:2015
    YOUR GENERAL CONTRACTOR FOR FORMING and MOLDING! FORGING, HOT PRESSES KALTFLIESSPRESSSEN, FREE FORM FORGING IN STEEL, STAINLESS, ALUMINUM, BUNTMETALL, TITAN, FLANGE, RING, TRIMS, Longitudinally PIPES, FEINGUSS, SAND CASTING, DIE CASTING MACHINING PARTS OF FORM PART, OR FROM THE FULL PROFILE
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1961
    Certifications
    Small series made of plastic and rubber and silicone are our strength. We build the moulds ourselves and can produce all three materials on modern injection moulding machines. The high vertical range of manufacture is rounded off by an efficient CAD team. The company has modern machinery for mould and tool making and for metalworking and injection moulding. The following technologies are used: - Injection moulding of plastics on machines between 25 and 450 t - Injection moulding rubber and silicone on machines between 25 t and 250 t - Milling - turning - eroding - grinding - assembly In addition, the company also manufactures bipolar plates and gaskets for fuel cells - Bipolar plates made of PPG 86 - low-temperature H2 fuel cell - Bipolar plates made of BMA 5 - direct methanol fuel cell - Bipolar plates made of high temperature H2 fuel cell material
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1947
    Certifications
    ISO 9001:2015
    Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1966
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    EWOQE
    EWOQE was founded in January 2021, starting with a single machine. By 2024, the company had developed into a team of four highly qualified employees from the region and now operates around 90 machines. We now provide our customers with a wide range of additive manufacturing techniques to meet their diverse needs. - FDM / FFF [* commercially available filaments from Spectrum and extrudr] - SLS [PA12] - SLA [all * commercially available resins from Formlabs] - MJF [PA12] We source our materials and raw materials exclusively from renowned companies to ensure continuous quality. EWOQE collaborates with various companies in the field of industrial manufacturing. Our work in the field of large format printing deserves special mention, as we have been able to support renowned players from the fields of art, culture and politics as well as public institutions from the initial idea to the completion of the project.
    > Go to profile
    Employees
    < 5
    Year of foundation
    2021
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    ENKO d.o.o
    We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    Klücher Tech competence in milling technology Founded in 2021, Klücher Tech produces components for you in the areas of tool and mold construction as well as machine and plant construction. The range of services includes extensive 3D geometries, custom-made products or individual parts through to small series parts. Equipped with modern production machines, Klücher Tech is ideally equipped for your order and offers a wide range of services. Great importance is attached to precision and short lead times. I would also be happy to manufacture your component according to your wishes
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1991
    Certifications
    C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Go to profile
    Employees
    > 1000
    Year of foundation
    1806
    Certifications
    Import / export of: Investment Casting Sand casting Forgings Turned parts of stainless steel, steel, bronze, copper Stampings Pressing and deep drawing components We are a medium sized import / export company and would like to offer and deliver your requirements for the following products, of course, with all the necessary inspection certificates according to PED 97/23/EC and / or AD2000 and automotive TS16949: - Made in the lost wax investment castings in stainless steel (eg 1.4308, 14408, 1.4362, 1.4462, 1.4581, 1.4571, 1.4404, 1.4852, 1.4749, 1.4517, etc.) or cast steel (eg 1.0619), heat-treated steels, tool steels, heat resistant steels and stainless steels Please note that a lot of turned and milled parts can be cheaper to produce investment casting! - Sand casting hand molded parts made of stainless steel, use weights between 10 kg and 3000 kg Investment Casting Materials see above - Stainless steel flanges according to DIN, EN, ANSI or your drawing - Punching pressing and deep drawing components from TS16949 certified manufacturing - Turning and milling parts from stainless steel, cast steel, copper - Forgings of stainless steel, seamless rolled rings, flanges of any kind Your advantage: We offer access to the most interesting Asian price levels without any risk. We are your contractor, you pay for the goods only after delivery and inspection, we ensure the quality permanently on the ground in Asia through its own QA inspectors.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2001
    Certifications
    IATF 16949:2016
    We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1986
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    "DSF" UAB
    The company was founded in 2008 "DSF" in North Lithuania is engaged in the manufacture of plastic parts by injection molding. We are happy to share our knowledge regarding the manufacture and design of plastic parts with you so that we can achieve the desired result in an optimal way. Our machinery consists of modern fully electric ENGEL injection molding machines which offer extraordinary level of precision with lower energy consumption and thus the quality and shape stability of the products. We have 1500 square meters of production area. The plastic parts can be manufactured according to our own forms or according to the customer's specifications. When necessary, the appropriate shapes can be manufactured. We back up our quality production with on-going process and operator control. Our services range from the development, construction, production to assembly and packaging. We invite you to know us. Send us an email or give us a call. We guarantee on-time delivery, reasonable prices, high quality and look us in advance to pleasant business.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2008
    Certifications
    ISO 9001:2015
    As a family-owned company, we have been standing for expertise in plastic injection moulding over 70 years. With extensive technical know-how, we support our customers from part development to series production. But our service goes beyond that - because we want to understand your requirements and offer customised plastic solutions. Together we achieve added value and ensure your success. Welcome to Faust Kunststoffwerk!
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1953
    Certifications
    IATF 16949:2016
    Manufacturer of injection molding tools 1 to. up to 60 to. multiple cavities 1K, 2K, 3K Mucell and SGI
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1998
    Certifications
    You are on the lookout for a certain material? Steel casting, grey cast iron, nodular cast iron, aluminium casting, die-cast zinc? Or do you require some other material? You prefer a specific moulding process? Sandcasting, shell moulding casting, Investment casting? Lostwax casting, Lostfoam casting? You are interested in moulds and cores made of furan resin sand or in other core technologies like cold-box and hot-box? We further offer: casting tools made of wood, synthetic material, metal and polystyrene; tools for the manufacture of forged parts. Surface treatment such as priming, painting/lacquering, galvanizing, chrome-plating and a lot more. Machining after all machining procedures. Delivery – if you wish – to your in-house warehouse. Or would you prefer a consignment stock? Let us know!
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1889
    Certifications
    ISO 9001:2015
    We are German manufacturer of high quality aluminum castings, which are mainly produced in permanent mold. We have a separate tool and model. We are in Werdohl in the Sauerland in the state of North Rhine-Westphalia. Our standard range includes machines keypads in the materials, aluminum, steel, plastic, cast iron, ductile iron and corrosion-resistant steel castings. We manufacture in particular handwheels in sizes 55-800 mm diam. aluminum and cast iron, and in sizes 80-400 mm diam. made of stainless steel castings. The individual one-off production of welded steel pipes and corrosion-resistant steel pipe handwheels is possible. Steel hand wheels made of stainless steel and powder coated steel are also available in sizes 100 - available as standard production parts 400 mm. We have delivery options for various casting, forging, sintering metal and plastic parts of almost all technologies. We offer these parts also processed completely finished. We do wage-clearing in the size range 3-45 mm through. We provide certified quality. Our customer base includes clients across the EU, Switzerland and Japan. With us you can correspond in German, English and Russian. Machine controls 1 Hand wheels made of stainless steel sheet 2 Hand wheels made of stainless steel casting 3 Hand wheels made of aluminum 4 Hand wheels made of cast iron 5 Handles 6 Ball Knobs 7 Clamping Levers 8 Star Cross Handles 9 Fittings made of aluminum handwheels 10 Valves made of cast iron handwheels Material size range [mm] 1 1.4571 Ø 80-400 2 1.4301 Ø 70, 160, 200, 250 3 GK-AlSi9Cu3 Ø 55-800 GK-AlSi 12 (Cu) ditto 4 EN-GJL 200 (GG 20) Ø 80-800 5 Thermoplastic M 6 - M 12; thermoset M 6 - M 16; Aluminum M 6 - M 16; steel M 6 - M 16 6 Thermoplastic Ø 16 - 32; thermoset Ø 12-60; Aluminium Ø 16 - 50; steel Ø 16-50 7 Steel Ø 16-50 1.4305 / 14301 Ø 16-40 8 Thermoplastic Ø 25 - 80; thermoset Ø 25 - 80; Aluminium Ø 40 - 80, gray cast iron Ø 32-100 9 Ripple ring DIN 390 Ø 63-200; spokes DIN 3220 Ø 160-280; spokes DIN 3319 Ø 125-315 630 + 10 Ripple ring DIN 390 Ø 63-160; spokes DIN 3220 Ø 120-500; spokes DIN 3319 Ø 100-630 METHOD Everything from one source, that is your advantage We have to bring several ways your castings in the form. Depending on the product we produce in gravity die casting, sand casting or wax molding process (Lost Wax). The planning and production of the mold is the task of our tool. Here in close collaboration with you the special form. We manufacture, depending on quantity and casting molds, models or lost duration models. The casting material is melted in our Crucible and then shaped. The further processing takes place primarily in the company. PRODUCTS Diversity is our program We operate in our own company and foundry melt. We manufacture machines keypads from the materials aluminum, steel, plastic, cast iron (gray iron and ductile iron), cast steel, brass, bronze and corrosion-resistant steel casting (stainless NiCr cast). We have a lot in store for you Many of our machines controls are stored as semi-finished goods. We deliver fast and customized according to your special requirements. A few product groups we keep in stock as blanks. Here is an even greater diversity processing is given. They are processed in our production according to your specifications: eg provided with abnormal bores, four edges or a special ...
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1928
    Certifications
    RILPLAST snc is a company active for over thirty years in the injection molding of thermoplastics and technopolymers. Inserted in the dynamic artisan reality of Lower Sebino, over the years the company has developed skills and experience in the most varied sectors of application of plastic, from products for early childhood, to articles in the electrical and electronic appliance sector , from the hospital and medical sector to that of sporting goods, lighting engineering, automotive and food packaging. Having verified how the customer appreciates the possibility of turning to a partner capable of relieving him of the many difficulties associated with the various phases of development and production of the products, the company has already decided for some time to take charge, also through a network of collaborators located in the immediate vicinity of the plant, of all pre and post molding operations. Thanks to the experience acquired, today Rilplast is able to satisfy the customer in all the different phases of the production: from the design to the prototyping and realization of the moulds, from the analysis of the most suitable materials up to the special finishes proposed.The company also offers internally a pre-assembly or/and complete assembly service of the molded parts, both manually and automatically, also with the use of in-house design machines. Certification and high quality of raw materials, use of any thermoplastic material from commodities to technopolymers and a technologically advanced machine park, which includes 26 injection presses with tonnages ranging from 6 to 450 tons fully automated, presses for micro molding and vertical presses for insert overmoulding, plus a whole series of complementary machinery, allow the company to work all the main plastic materials in the best possible way, creating both standard and technical details.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1981
    Certifications
    ISO 9001:2015
    The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    2006
    Certifications
    ISO 9001:2015
    The Brinkmann mold GmbH offers its customers services started with the construction of prototypes, to the realization of complete process chains for injection molding components. Our range includes the development phase, the construction and tool to series deliveries in bulk or small series about our embedded partners. In addition, we support our customers in the procurement strategy to include best-cost country suppliers in the field of tool in order to increase competitiveness. In this section, we work with many years of professional partners and take over the complete technical and logistical management. In the field of injection molding, we process all common plastics in single and multi-component injection molding of products manufactured by A as ABS curtains decor holders to Z as the gear of PA 30% GF. Toolmaking: Construction CAD / CAM, wire EDM, sinker EDM, 3D HSC milling, grinding, assembly, sampling Injection molding partner companies: 60 injection molding machines (20-1000t clamping force), screen printing Sectors: agriculture, automotive, consumer goods industry, furniture industry Delivery program: injection molding and stamping tools, injection molded parts, screen printing, stamping parts
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2001
    Certifications
    Tool making and machining Mull Tool Making and Machining GmbH – Your qualified business partner for series production, unit production and prototype production! We manufacture units on modern 5 axis CNC machining centres with the material of your choice, for example steel (e.g. St52, 1.4305, 16MnCr5 or C45), titan (e.g. Ti6Al4V), aluminium (e.g. AlMgSi, AlMg3, AlMgCuPb or AlZnMgCu1,5) and plastics (e.g. POM, PA, PA6.6 GF30 or PTFE). Magnesium manufacturing Furthermore, we offer our customers, to take over complete manufacturing processes like machining magnesium parts from solid metal (e.g. AZ31B) including the proximate surface treatment. We also carry out the mechanical processing of series parts from magnesium pressure cast - e.g. AZ91 Reliable quality Because of our efficient production processes we are able to provide competitive prices and a constant high grade. Mull Tool Making and Machining has modern machinery and the required know-how to produce all parts exactly meeting to your needs. Of course we obey all relevant norms and apply our certified quality management ISO 9001:2008 since 2002. On our 1200qm production area you will find all fields of manufacturing close together. That way we are able to deal with your orders promptly and efficiently. Our Services • Series production • Prototype production • Unit produktion • Magnesium machining • Magnesium chipping • Titanium machining • Pressure casting • further casting-methods • CNC-turning • CNC-milling • CNC-electrical discharging • Tooling
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1986
    Certifications
    ISO 9001:2008
    Our company deals with business development for German and Korean companies.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2003
    Certifications
    ISO 9001:2008
    Welcome We see ourselves as an average modern operating company, based in Istanbul. Our company is working successfully in different industries (mechanical engineering, textile machinery, medical instrument industry, automotive industry, construction industry, graphic and optical industry, etc.) whose requirements are as varied as your products. In our mechanical production, we offer you virtually all machining manufacturing processes. Drilling, turning, milling and external cylindrical grinding in conventional production, milling and turning on modern CNC machines. That is our guarantee for your series production. With us you always get a completely finished product. Whether small series or prototype, whether raw or finished coating, whether or Kuststoff steel - all orders we finished quickly, reliably and accurately measured. Take advantage of our many years of experience and learn in the following pages to know our wide program. We are happy to await your inquiries and would be pleased if we could count you among our satisfied customers and your company. We support each other. The quality of our work ensured the success of our company. "Everyone is for each model, with production processes, each of the customer of the neighbor." About us The company Integral Makina sees itself with its long-standing and qualified staff as a traditional but modern positioned and competitive manufacturer of components for the Maschienenbau, Textilmaschienen, Medical Instrument Industry, Mechanical biomedical sector, automotive industry, construction industry, graphic and optical industry, etc. The technological requirements are determined by modern CNC machining centers. As the material in addition to steel and cast iron, aluminum, plastic and stainless steel, etc. is processed. Through close cooperation with companies from the region, we are able to manufacture complementary areas, suchEtc. to use as sheet metal processing (laser cutting), Hardening, Surface Finishing, external and internal cylindrical grinding, surface grinding, welding, assembly in a variety of ways and included in our manufacturing facilities. Customer-oriented quality assurance and on-time delivery are our determined measure of performance.
    > Go to profile

    Watch

    Libo GmbH
    Libo Auto Parts Precision Casting Co., Ltd. was founded on September 9, 2011 in Qingdao China. Average number of employees in 2017: 468 2017 sales of precision casting business unit: 180 million RMB
    > Go to profile
    Employees
    500 - 1000
    Year of foundation
    2011
    Certifications
    ISO-TS 16949:2
mehr anzeigen